apparent porosity的意思

apparent porosity中文翻譯：

[陶瓷]顯氣孔率；虛表孔率

相似詞語短語

apparent───adj.顯然的；表面上的

porosity───n.有孔性，多孔性

readily apparent───顯而易見

apparent power───視在[表觀]功率；[電]視在功率；[電]表觀功率

heirs apparent───法定繼承人，有確定繼承權的人

heir apparent───n.有確定繼承權的人；法定繼承人，有確定繼承權的人

apparent to───明顯；對…來說顯而易見

startlingly apparent───驚人的明顯

plainly apparent crossword───明顯的縱橫填字游戲

雙語使用場景

the increase of sintering temperature, the apparent porosity of sample decreases, while bulk density, hardness and compressive strength increased.───燒結溫度的升高，材料的顯氣孔率降低，而體積密度、硬度和抗壓強度均增加。

apparent porosity and water absorption were the lowest, the bulk density and heat-resistant property were the highest after dipping for 4 times.───浸漬次數增加而優化，浸漬4次的顯氣孔率和吸水率最低，體積密度和熱穩定性最高。

These products have very compact structure, low apparent porosity, high refractoriness, and excellent corrosion resistance.───該產品具有組織結構致密、顯氣孔率低，耐高溫、耐侵蝕能力強等特點。

Ceramic tiles. Part 3 : determination of water absorption, apparent porosity, apparent relative density and bulk density.───瓷磚.第3部分：吸水率、外表孔隙率、外表相對密度和松密度的測量

Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity───高級技術陶瓷。陶瓷復合材料。物理特性。測量密度和表面孔隙度

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of density and apparent porosity───精細陶瓷（高級陶瓷、高技術陶瓷）密度和表觀氣孔率的測定

Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products───焙燒衛生陶瓷制品的吸水率、松密度、表觀多孔性與表觀比重的試驗方法

testing method for water absorption, bulk density, apparent specific gravity and apparent porosity of fired whiteware products───陶瓷吸水性、毛體積比重、表觀比重、表觀氣孔率測定方法

Test method for the apparent porosity, water absorption bulk density and true porosity of dense shaped refractory products───致密定形耐火制品顯氣孔率、吸水率、體積密度和真氣孔率試驗方法

英語使用場景

Results showed that compared with porous SiC ceramics, the MOR of SiC-cordierite was improved significantly, and the TEC decreased remarkably, and the apparent porosity also decreased.

With the increase of sintering temperature, the apparent porosity of sample decreases, while bulk density, hardness and compressive strength increased.

These products have very compact structure , low apparent porosity , high refractoriness , and excellent corrosion resistance.

The apparent porosity and water absorption were the lowest, the bulk density and heat-resistant property were the highest after dipping for 4 times.

Traditional corhart has lots of holes. The silica fume is to fill these holes so as to increase the density, decrease the apparent porosity and increase the strength of corhart.

The low density drilling fluid has borehole excavation effect on compensated neutron porosity logging, and by this way apparent porosity is lower than the true value.

It is shown that the changes of is resulted from the changes of both apparent porosity and the distance between layers of gel-type montmorillonite in interparticle pores.