drilling line的意思

drilling line中文翻譯：

[油氣]鉆井用鋼絲繩

相似詞語短語

drilling───n.鉆孔；訓練，教練；演練；v.鉆孔；訓練（drill的ing形式）

drilling down───向地下鉆；深度探討

crowner drilling───冠鉆

drilling operation───鉆井作業

drilling hole───鉆孔

drilling jobs───鉆井作業

choral drilling───齊聲練習

ocean drilling───海洋鉆探

drilling team───鉆井隊

雙語使用場景

we need to slip the drilling line very often?───我們需要經常滑大繩嗎？

Feed the new drilling line (fast line) through the side of the drawworks drum.───把快繩頭穿過絞車輥筒的一邊。

Ensure that the drilling line is in tension at all times. Slack in the drilling line can not be tolerated.───確保大繩一直處于拉緊狀態，不允許把大繩纏松出間隙。

Evaluation of the service life of a rotary drilling line is of great importance to ensuring safe drilling and reducing drilling cost.───鋼絲繩使用壽命評定對確保鉆井安全與降低鉆井成本具有十分重要的意義。

The reeling out of the drilling line is powered by gravity and reeling in by an electric motor or diesel engine.───松開鋼絲繩是依靠重力的作用，而纏繞鋼絲繩則是借助于電馬達或柴油機。

Insert the drilling line from the spool through the snatch block up to the rig floor and secure.───把大繩從儲備筒上拉出來，穿過開口滑輪，引上鉆臺，綁住。

The driller checks the end of the new drilling line for damage, and cut off any defective section by using of a hydraulic line cutter.───司鉆檢查新大繩的快繩頭，如有任何損傷或缺陷，就用液壓切繩器把它切掉。

Always slip and cut the drilling line with the drill string in the cased hole and the bit is at or near the casing shoe.───滑大繩或者倒大繩時，一定要把鉆具下到套管內，使鉆頭處在或接近套管鞋。

Warning: ensure that no person is inside the loop of the drilling line during the next step.───注意：在進行下一步作業時，人不能站在大繩盤的環內。

英語使用場景

The primary function of the drawworks is to reel out and reel in the drilling line, a large diameter wire rope, in a controlled fashion.

Business owners lathe, planer, milling, drilling, line cutting, and other processing equipment.

For added holding and pulling strength, drive four nails through the snake and the drilling line, and wrap the snake with soft wire and tape the entire length.

The driller ensures that the drilling line is wrapped with the soft wire or tape at both sides of the mark before cutting the drilling line with the hydraulic line cutter.

The driller must ensure that the drilling line is reeved in under tension and that the drilling line is properly seated in the drum grooves.

With the new drilling line properly reeved on to the drawworks drum, pick up the weight of the traveling block, test the drawworks brake, and verify that the drilling line is tight on the drum.