arc furnace的意思

arc furnace中文翻譯：

[冶]電弧爐，直接電弧爐

相似詞語短語

furnace───n.火爐，熔爐

arc───n.弧（度）；弧光（全稱electricarc）；弧形物；天穹；vt.形成電弧；走弧線；n.(Arc)人名；(法)阿爾克；adj.圓弧的；反三角函數的

arc flash───電弧閃光

electric furnace───電爐；電阻爐

jerboa arc───跳鼠弧

furnace stove───火爐

fordo arc───福爾多弧

refract arc───折射弧

cupel furnace───灰吹爐，提銀爐

雙語使用場景

Smelting of SiMgREBa alloy with rare earth rich slag, barite and lime in electric-arc furnace is introduced in the paper.───在電弧爐中用稀土富渣、硅鐵、重晶石、石灰等原料冶煉稀土硅鋇鎂合金的研制過程。

electric arc furnace steel-making productivity has gained rapid progress in the recent years.───近幾年來，電弧爐煉鋼生產率有較大的提高。

In recent years, finger shaft arc furnace developed by FUCHS got an important position in the field of arc furnace steelmaking.───在電弧爐煉鋼領域，德國FUC HS公司開發的手指式豎爐電弧近年受到了普遍的重視。

The electric arc furnace is better for the production of special steels than any other types of furnace, since it needs no fuel.───電弧爐用來生產特殊鋼比用任何其他爐子都好，因為它不需要燃料。

The heat treatment of ferronickel submerged arc furnace slag has little effect on reducing drying shrinkage of hardened cement paste.───返爐處理不影響鎳鐵合金礦熱爐渣輔助膠凝材料減少水泥石體系干燥收縮的效應。

This shows to produce Al-Si alloys (50%Al) in submerged arc furnace is possible.───指出礦熱爐冶煉含鋁50%的硅鋁合金是可行的。

The oxygen lances for electric arc furnace steelmaking can be divided into oxygen burning lance and blowing oxygen and burning carbon lance.───電弧爐煉鋼用氧槍分為吹氧助熔用氧槍（氧燃噴槍）和吹氧燒碳用氧槍兩類。

To take away the refining part of the steel making cycle off an electric arc furnace, which is discussed elsewhere, is an excellent start.───把煉鋼周期中的精煉階段從電弧爐中移走（這個問題將在別處加以討論），是一個良好的開端。

This paper introduces the features of finger shaft arc furnace and looks forward to its future.───介紹手指式豎爐電弧爐的特點，并展望了未來的發展趨勢。

英語使用場景

For example, an arc furnace is nonlinear since it will draw a no sinusoidal current (rich in harmonic's) when a sinusoidal voltage is applied.

Mainly used in electric arc furnace steel imports, refining furnace, mining, metallurgy electric, insulation package.

The electric arc furnace steel - making productivity has gained rapid progress in the recent years.

Blowing gas from the arc furnace bottom is a new method for steelmaking.

Arc furnace of superhigh power has great influence on the electric net-work.

The direct arc furnace is particularly suitable for the production of high alloy irons.

In process control system for DC arc furnace steelmaking, modelling is a key part.

Induction furnace, electric arc furnace, melting steel and iron.

As - mentioned factors, electric arc furnace - making enterprises will need to meet the operating rate of about 60 %.