arc welding process的意思

arc welding process中文翻譯：

弧焊過程

相似詞語短語

arc welding───電弧焊，[機]弧焊；電弧焊接

submerged arc welding───埋弧焊；潛弧焊

shielded metal arc welding───自動保護金屬極電弧焊，熔化極自動保護電弧焊

welding───v.焊接；（使）緊密結合，成整體；焊接（物件）；（通過熔化或軟化）連接（weld的現在分詞）；n.焊接，鍛接

arc───n.弧（度）；弧光（全稱electricarc）；弧形物；天穹；vt.形成電弧；走弧線；n.(Arc)人名；(法)阿爾克；adj.圓弧的；反三角函數的

mig welding───金屬惰性氣體電弧焊

arc flash───電弧閃光

bevelling welding───坡口焊

jerboa arc───跳鼠弧

雙語使用場景

Its electric characteristic, structure feature, fault analysis, interface circuit and arc welding process program are analyzed and discussed.───對其電氣性能、結構特點，故障診斷、接口電路及弧焊工作程序等作了比較全面的分析和討論。

argon arc welding process after replacement of intercooler cooling section was presented. The welding feature and weldability were analyzed.───介紹了中冷器抽換散熱單節的氬弧焊接工藝，分析了中冷器抽換散熱單節的焊接特點以及焊接性。

mixed gas metal arc welding process is used for the first time by DFEM in the discharge chamber of the hydraulic turbine exported to Syria's Tishrin.───首次采用混合氣體熔化極氣體保護焊焊接水輪機轉輪室，并且在出口敘利亞的迪什林水輪機中應用。

Block device can be avoided arc welding process monitoring personnel in the operation by the burn.───擋弧裝置可避免焊接過程中操作監控人員受到燒傷。

It reveals the relationship between the weld quality and the matching of parameters in plasma arc welding process .───從等離子電弧力的角度，探討了等離子弧焊接工藝參數及其匹配的內在聯系與規律性。

The surface welding on 45 steel substrate was carried out by shield metal arc welding process using electrode CHR172.───采用CHR172堆焊焊條，通過電弧焊工藝在45鋼上進行堆焊試驗。

The current situation and necessity of arc welding process automation is described briefly.───簡述了焊接工藝過程自動化的必要性和國內外發展現狀。

The microstructure and properties of welded joint of EH40 grade ship steel plate by submerged-arc welding process were analyzed.───對EH40船板鋼埋弧焊焊接接頭的組織性能進行了試驗分析。

The ceramic lined pipes were welded by arc welding process .───采用電弧焊接方法焊接陶瓷內襯復合鋼管。

英語使用場景

Its electric characteristic, structure feature, fault analysis, interface circuit and arc welding process program are analyzed and discussed.

Quasi - keyhole arc welding process is a typical nonlinear system.

The application of Kalman filtering for the weld detection in the arc welding process is presented.

Too much spatter and bad - welding bead are the two cirtical problems short circuiting arc welding process.