bit nozzle的意思
bit nozzle中文翻譯:
鉆頭噴嘴
guarder nozzle───保護噴嘴
nozzle spray───[醫] 噴嘴
nozzle air───噴嘴空氣
nozzle equation───噴嘴方程
nozzle valve───[動力]噴嘴閥
dredge nozzle───挖泥嘴
rinsing nozzle───清洗噴嘴(rinsing是rinse的現在分詞)
nozzle brush───噴嘴刷
nozzle tip───噴嘴;油嘴
influence of bit cutting teeth and its jet nozzle on the flow field is taken into account in the simulation.───模擬中考慮了鉆頭的切削齒和射流噴嘴對流場的影響。
Based on this image, I am going to estimate each nozzle to have a radius of about 0.6 meters (although I think that estimate is a bit large).───根據這張圖,我估計每個噴嘴的半徑約0.6公尺(雖然我認為估計值稍微大了點)。
inclination angle of a side nozzle is 0, 30,45 and 60 degrees, the eddying flow of the bottom hole vortex device will cause rotation at the bottom hole, affecting on the jet from bit nozzles.───側噴嘴傾斜角度在0度、30度、45度和60度情況下,由于井底渦旋器的旋流作用,導致井底產生旋轉,對鉆頭噴嘴射流產生了影響,以致在45度時出現壓力損失最小的情況;