adhesive layer的意思

adhesive layer中文翻譯：

粘膠層

相似詞語短語

adhesive───adj.黏合的；黏性的；可粘的；n.粘合劑；膠帶

layer───vt.把…分層堆放；借助壓條法；生根繁殖；將（頭發）剪成不同層次；n.層，層次；膜；[植]壓條；放置者，計劃者；vi.形成或分成層次；[植]通過壓條法而生根

adhesive plaster───[醫]橡皮膏

adhesive materials───[醫]膠粘材料

eyelash adhesive───睫毛膠

conductive adhesive───[膠粘]導電粘合劑

adhesive tape───膠布；n.膠帶

pur adhesive───聚氨酯膠粘劑

adhesive force───粘合力，[力]附著力；粘著力，粘附力

雙語使用場景

The resistance property is mainly related to the bed channel, depth and rheology of the adhesive layer.───粘性泥石流體運動的阻力特性主要與溝槽特征以及泥深和粘附層流變特性有關。

was pointed out the adhesive layer material is one of the key techniques for the long-span steel bridge pavement.───了鋼橋面鋪裝出現的主要病害，分析了病害出現的原因，指出鋼橋面鋪裝中粘結層材料是關鍵。

Bonding force of substrate and adhesive layer is large. No adhesive failure occurs during storage and construction.───基材與膠層結合力大，在存放或施工過程中不存在脫膠現象。

Adhesive layer must also be in a dedicated extruder melting, as a separate layer is being fed into a mould.───粘合層也必須在一個專用擠出機中熔化，作為單獨增加的一層送入模具。

and the adhesive layer is at least arranged on the lower surface of the ball collecting space to adhere the solder remains.───所述至少一黏著層至少設置在所述集球空間的下表面，以黏著所述焊料殘骸。

if the adhesive layer with a thick, which increase the height of a uniformly cots, malta adhesive layer.───如果膠層較厚，可提高勻膠輥高度，將膠層減薄。

Adhesive tape is tape-shaped anticorrosion material made of Polyethylene film heat laminated with adhesive layer of butyl glue.───聚乙烯膠粘帶是由聚乙烯基膜，熱復合上一層以丁基膠為主體的膠粘層，共擠壓成的帶狀防腐材料。

A C4 grind tape and a laser-ablative adhesive layer are formed on a front side of a semiconductor substrate.───在半導體襯底的正面形成C4研磨帶和激光燒蝕粘合層。

At this point, the label on the back of material because of the adhesive layer, conductive ink business card printing and membership card.───此時，標簽背材的背背由于有膠黏劑層，不利于導電油墨的制卡和會員卡制作。

英語使用場景

The Q-factor , output gain and frequency of cleavage of resonator which were effected by the thickness of adhesive layer, material properties and defects in adhesive layer were detailedly analyzed.

A plastic-steel coated pipe is composed if internal plastic pipe, adhesive layer, steel pipe layer, thermosol layer and plastic layer.

In addition, a metallic adhesive layer (3) can be provided between the metallizing layer (2) and the metallic final layer (4).

A blank screen on a partly covered with adhesive layer photoptic, smooth surface.

This paper is to discuss the interlaminar stresses of adhesive lap joint by the energy method without considering the adhesive layer.

Ordinary PS plate aluminum base, alumina layer and photographic adhesive layer.

For a given layered planar structure, we use the solidifying process of the adhesive layer to simulate the change process of interface strength of the adhesive joint.