青年中文青年中文

angle difference的意思

angle difference中文翻譯:

角度差,角度差

相似詞語短語

difference───n.差異;不同;爭執

angle───n.角,角度;視角;立場;角鐵;(古)魚鉤;v.斜移;從……角度提供信息;釣魚;謀取

difference maker───差異制造者

voltage difference───[電]電壓差

percent difference───百分比差異

price difference───[物價]價格差別;價差

healing angle───愈合角

face angle───齒面角;[數]面角

intercepted angle───截獲角

雙語使用場景

Negative components and the installation Angle difference Road in place within 7 degrees, the attachment can use.───陰性部件的安裝角度與就位道相差7度范圍內時,附著體仍可正常使用。

method for reducing ratio difference and Angle difference of micro-transformer of current and micro-transformer of voltage is forward.───提出了減小微型電流互感器和電壓互感器的比差和角差的方法。

on the unit-operating capacity of system, length of lino and the phase angle difference of sources both sides of the closing resister.───系統開機容量、線路長短及合閘電阻兩側系統電源的相位差有關。

General speaking, conditions and conclusion of the main body now differences in three aspects: one is the Angle difference.───普通來說,條件與結論的差異主要體如今三個方面:一是角的差異。

The Measurement of Phase Angle Difference Between Periodic Signal Using FFT and Its Error Analysis───測量周期信號相角差及其誤差分析

The realization of septal-bumps crank with the same rotational angle difference control by PLC───隔膜泵曲軸等轉角差控制的計算機實現

High precision large flat mirror measurement by angle difference testing───高精度大口徑平面鏡面形角差法測試探究

Measuring Transducer for Phase Angle Difference───相角差測量變送器

Analysis and Simulation of Angle Difference of 600 MW Thermal Unit Auxiliary Supply───600MW火電機組廠用電相角差分析與仿真

英語使用場景

The energy depends on the unit-operating capacity of system, length of lino and the phase angle difference of sources both sides of the closing resister.

Finally, this paper analyzes the influence to the current value after operations led by the variations of bus node voltage phase angle difference and amplitude difference.

Results show that, as long as the moving blade angle difference of the two blowers or kept within critical bounds, no surging of the blowers will occur.

The enlargement of the contact angle difference between inner and outer race reduces the stiffness of the bearings, because the force transmission ratio becomes increasingly worse.

The experiment shows that a certain barbette servo system designed by this way has a good stability both in the case of small and big angle difference.