angle method的意思
angle method中文翻譯:
割角法;角度法;分角法;夾角法;角方法
method───n.方法;條理;類函數
angle───n.角,角度;視角;立場;角鐵;(古)魚鉤;v.斜移;從……角度提供信息;釣魚;謀取
healing angle───愈合角
face angle───齒面角;[數]面角
intercepted angle───截獲角
gasometric method───氣體容量法,氣體定量分析法
teaching method───教學方法;教學方式
setter method───塞特法
stiffness method───[力]剛度法;勁度法
The method has been realized by using Brewster angle method on spectrometer.───這種方法是應用布如斯特定律在分光儀上實現測量固體的折射率。
And lofting with polar coordinates method can break through localization of deflection Angle method.───極坐標法放樣可以避免偏角法的局限性。
hydrophobicity recovery of HTV silicone rubber after different corona duration was investigated with the static contact angle method.───的高壓外絕緣材料硅橡膠的憎水性恢復的影響。
With a simple tilting angle method, we fabricated a topographic substrate formed with a packed polystyrene microbead array.───采用一種簡單的傾斜角法可以制備一種聚苯乙烯微球致密陣列型基底。
Multidisciplinary and multi-angle method are used to compare the advantages and disadvantages of product placement.───運用多學科多視角的分析方法,對植入式廣告的優劣勢進行比較。
The tester is using impedance-phase angle method and combining with the fill-up counting method to measure L, C and R respectively.───該測試儀采用阻抗-相角法結合填充計數法來分別測量各參數;
There are visual method, common angular point and conversion angle method.───這些方法都不同程度的存在繁瑣、不易理解等問題。
Check connection flange is tightened according to the angle method.───檢查連接法蘭是否按照對角法擰緊。
Study of the Harmonic Distortion in Testing Circular Division Ruling Error Using Constant Angle Method───常角法檢測圓分度刻劃誤差諧量失真的研究
And lofting with polar coordinates method can break through localization of deflection angle method.
The transition curve is a familiar curve form. And lofting with polar coordinates method can break through localization of deflection angle method.
Finally, making a comparison between simulated data and classical heading angle method, an conclusion is given.
Discuss the principle of the adaptive angle method and the way of generating control instruction.
The vectorial angle method is employed to evaluate the validness of every drill - down operation.
Through analysis and practice, it is not advisable that different helix angle worm is cut by a same gear lathe cutter adopting cutter turning angle method in production.
With the kinematic model of satellite's attitude applied, the estimate models of attitude determination based on Euler angle method are presented.
In addition, critical angle method is introduced for automatic focusing.
The experiment came into use single light path critical angle method, output signals were detected by four-quadrant receiver, micro-displacement drive element were piezoelectric ceramics.