bending force的意思

bending force中文翻譯：

彎曲力

相似詞語短語

bending───n.彎曲，彎曲度；v.彎曲（bend的現在分詞）

flatwise bending───平面彎曲

bending over───俯身；折轉

flexural bending───塑性彎曲

anticlastic bending───抗塑性彎曲

bending moment───[力]彎矩；[力]彎曲力矩；[力]撓矩；彎（曲）矩，撓矩

force───n.力量；武力；軍隊；魄力；n.(Force)人名；(意)福爾切；(英、法)福斯；vt.促使，推動；強迫；強加

hogging bending moment───中拱彎矩

coulombic force───庫侖力

雙語使用場景

occlusion by molar and premolar of fracture part, the stress of upper fracture part was bending force and the lower was compressing force.───側磨牙、前磨牙咬合骨斷層應力分布下部為張力帶、上部為壓力帶。

Since a bending force is exerted on the pipe during break out, the tool joint connection must be set in the slips as low as possible.───由于卸扣會使鉆具產生彎曲力，因此，鉆具接頭必須盡可能低些坐在卡瓦上。

industrial trials of the online shape control models which include roll configuration, and bending force preset calculation were carried out.───包括輥型配置和彎輥力自動設定等的板形在線控制工業試驗。

As fact, Boom is in line with nonlinear bending force mechanism. The stability of the surface is the essence of strength problem.───事實上，臂架的受力符合非線性彎曲的機理，表面的穩定性問題的實質是強度問題。

Note: Since a bending force is exerted on the pipe during make up, the tool joint connection must be set in the slips as low as possible.───注意：由于緊扣時，鉆具要承受彎曲力，應將卡瓦坐在盡可能低的位置。

The author has done an analysis of the contact stresses distribution and the relationship between rolling force and bending force.───并對接觸應力的分布及軋制力與彎輥力的關系進行了分析。

Taking the industrial mills as the object of study, a GA-based optimal control model for preset bending force is studied.───以具體工業軋機為對象，研究了基于遺傳算法的彎輥力預設定控制策略。

Mainly want to get the relationships between bending force and plate crown, bending force and plate wide.───主要為了得出彎輥力與板凸度、彎輥力與板寬的關系。

Improvement of the Roll Shape and Reduction of the Roll Bending Force for Increment of Life of the Work Roll Bearing and Roller───改善輥型降低彎輥力提高工作輥軸承及軋輥使用壽命

英語使用場景

Conclusions: The maximum bending force, deformations, stiffness and absorbed energy increased with subjects' age, and boy's long bones have higher resistance to bending than girl's bones.

Conventional teaching methods of internal bending force in material mechanics has been re-formed with new methods put forward.

The change of strip crown is in direct proportion with work roll shifting distances and roll bending force and the square of strip width.

Experiments indicate the computing method for air bending force has important application...

Experiments indicate the computing method for air bending force has important application value.