青年中文alloys的意思
alloys中文翻譯：
n.[材]合金（alloy的復數）
n.（Alloys）人名；（法）阿盧瓦
alloys ex───合金ex
alloys definition───合金定義
wrought alloys───[醫]鍛制合金
alloys compd───合金公司
alloys unlimited ohio───俄亥俄州合金無限公司
alloys and components dallas───達拉斯合金及部件
In order to be purified, or combined into alloys, metals must be melted.───為了凈化或合成合金，金屬必須熔化。
From steel and aluminum to exotic alloys and carbon fiber.───從鐵和鋁到合金和碳纖維。
hardness of the alloys which is modified is advanced by about 50%, appropinquity HB84.9.───該合金中硅相細化，使布氏硬度提高50%，硬度可達 HB84.9。
A novel non-toxic chemical conversion treatment with low energy consumption was used for the surface modification of magnesium alloys.───介紹了一種新型、無毒、低能耗的鎂合金化學轉化處理方法。
Just as with the lead-based solder alloys, there are several alloys that seem to be the most commonly used.───就如同使用含鉛焊料合金一樣，同樣也存在幾種看來最為常用的合金。
The machinability of a new type material used for the roll-sleeve in the transnormal roll casting of aluminum alloys was researched.───對新型鑄軋輥套材料的切削加工性能進行了綜合分析；
Mining executives say that metal consumers are trying to economise, using new alloys or moving into plastics whenever possible.───礦業高管表示，金屬消費者正力求節約，盡可能采用新合金材料或改用塑料。
Recent developments over these years on the surface treatment for aluminum and its alloys by micro -arc oxidation (MAO) were reviewed.───綜述了近年來利用微弧氧化技術對鋁及其合金進行表面處理的研究進展；
It is known to all that metals are mostly used in the form of alloys.───眾所周知，金屬主要是以合金的形式使用。
Alloys Figure 6.31 shows the phase diagram for zinc and cadmium.
Wrought alloys possess good forgeability , it gives way to pressure.
These alloys are characterized by their extreme hardness.
Strange alloys can be made with ingredients from different creatures.
In this paper, aluminum - scandium alloys were prepared starting form scandium oxide by molten salt electrolysis.
High quality amorphous metals and alloys are made by rapid solidification technique.
The chronological introduction of different alloys can then be compared between different cultures and geographical areas.
The result: a whole range of new alloys, tailored to meet new needs.
Changes in aerodynamics, lighter alloys in engines and leaner fuel consumption will be the main features.