hybrid welding的意思

hybrid welding中文翻譯：

混合焊接

相似詞語短語

welding───v.焊接；（使）緊密結合，成整體；焊接（物件）；（通過熔化或軟化）連接（weld的現在分詞）；n.焊接，鍛接

mig welding───金屬惰性氣體電弧焊

bevelling welding───坡口焊

hybrid rice───雜交稻；雜種稻；雜交[水]稻

active hybrid───主動混合動力

curcuma hybrid───姜黃

hybrid theory───雜交說; 混合理論；雜交說；混合理論

abutilon hybrid───阿布蒂隆雜種

highlander hybrid───漢蘭達混合動力車

雙語使用場景

predicted results agree well with experimental results for a hybrid welding experiment on 1420 Al-Li alloy.───鋰合金的復合焊工藝試驗表明計算結果與試驗相符合。

The laser-arc hybrid welding can improve the depth of fusion, welding speed and assembly gap, so it is a new and promising thermal source for welding.───激光-電弧復合熱源焊接可以增大焊接熔深，提高焊接速度，增大裝配間隙，是一種很有前途的新型焊接熱源。

For the industrial application of laser-arc hybrid welding, the groove gap bridging ability of this process was investigated in detail.───為推動激光-電弧復合焊接的工程應用，對其接頭間隙橋接能力進行了系統研究。

For the laser welding with filling wire and hybrid welding, the interaction between heat reservoir and material expressed periodic changing.───在激光填絲焊和復合焊接過程中熱源和物質的相互作用呈現周期性變化。

Penetration status is an important criterion to evaluate the weld quality of laser-MIG hybrid welding in gapped butt welding.───激光-MIG復合對接焊中，熔透狀態是反映焊縫成形質量的重要指標。

The results are applicable in theoretical analysis and experimental research of laser-TIG hybrid welding technique.───這一結果可用于指導激光-TIG復合焊接技術的理論分析及其實驗研究。

The predicted results agree well with experimental results for a hybrid welding experiment on 1420 Al-Li alloy.───針對1420鋁鋰合金的復合焊工藝試驗表明計算結果與試驗相符合。

The hardness of thick plates joint shows that there is big difference in mold of vertical thermal cycle using laser-arc hybrid welding.───接頭硬度表明厚板激光復合焊焊縫縱向熱循環模式存在較大差異。

The input of YAG laser makes the stabilities of arc ignition and combustion prominent in hybrid welding process.───YAG激光的加入有效地提高了復合焊接過程中復合電弧起弧及燃燒的穩定性。

英語使用場景

The laser-arc hybrid welding can improve the depth of fusion, welding speed and assembly gap, so it is a new and promising thermal source for welding.

The advantage and application of YAG laser- MIG/MAG arc hybrid welding were introduced in this paper. Main technological factors which affect YAG laser- MIG/MAG arc hybrid welding were generalized.

The laser - arc hybrid welding technology for LF 6 aluminum alloy was introduced.