青年中文haz的意思
haz中文翻譯：
abbr.熱影響區（Theheataffectedzone）
turn haz───轉彎haz
Thermal cycling is an important factor to determine structure and property of HAZ after welding.───熱影響區的熱循環是決定焊后熱影響區組織和性能的重要因素。
The microstructure evolution in HAZ of Welds is a complex procedure, which associates with many factors.───熱影響區微觀結構演化與諸多因素密切相關，是一個復雜的過程。
toughness of HAZ is higher than base metal under appropriate laser welding conditions.───合適的激光焊接條件下，熱影響區韌性高于母材；
The results show that the welding thermal-cycle on its mechanical property of the HAZ has no evidence effect.───結果表明，焊接熱循環對其熱影響區的性能沒有明顯的影響；
The weld section looks like an inverted trapezia and the heat affect zone (HAZ) is very narrow.───焊縫截面呈上寬下窄的倒梯形，熱影響區（HAZ）相當窄；
Fibrous processing marks remain in the heat-affected zone (HAZ) with part of precipitated solid phase solved into the base metal.───熱影響區內，仍可見纖維狀加工痕跡，部分析出相固溶到基體中；
The microstructure of weld bead obtained by shielded metal arc welding are massive ferrite and a little pearlite, HAZ are lath bainitic.───手工電弧焊焊縫組織主要為塊狀鐵素體和少量珠光體，熱影響區組織為板條狀貝氏體組織；
The microhardness distribution of the welded joint is along the welding line. The microhardness is higher in nugget zone, and lowest in HAZ.───焊接接頭的硬度分布沿焊縫中心基本對稱，焊核區硬度較高，熱影響區硬度最低。
high strength pipeline steel pipes and its welding HAZ shall have well properties of low temperature toughness and site girth welding.───以得到同時具備高強度、良好的低溫韌性和現場焊接性能的管線鋼。
The effect of welding line energy on microstructure and low temperature toughness of heat-affected zone(HAZ) of X70 pipeline steel was studied by welding thermal simulation method.
The temperature field in welding HAZ was studied and analyzed. Welding heat curve was set up by argon-shielded tungsten arc welding experiment.
Result of cross section analysis showed that the second phase reduced within a range of several tens microns, and the depth of heat affected zone (HAZ) increased with the increment of pulses.
The fracture toughness of the weld metal is lower than that of the base metal and the fracture toughness of heat-affected zone(HAZ) is intervenient between those of weld metal and base metal.
The grain distribution and heat pining of grain growth in the welding HAZ. Different influence were predicted by different heat input .
Fracture toughness of heat - affected zone ( HAZ ) was between the base metal and weld metal.
Thirdly, Through Y-slit type cracking test and HAZ maximum hardness test the paper assesses the cold crack sensitivity of JB800 bainite steel.
Fibrous processing marks remain in the heat-affected zone (HAZ) with part of precipitated solid phase solved into the base metal.
In this paper, the process of grain growth in the welding heat affected zone(HAZ) of the super pure stainless steel of EB26—1 was simulated by a MC method.