青年中文hot cracking的意思
hot cracking中文翻譯：
熱裂紋
cracking───n.裂紋，裂縫；爆裂聲，噼啪聲；分餾；v.破裂；發爆裂聲；打開；重擊；變聲（crack的現在分詞）；adv.非常，極其；adj.出色的，極好的；快而令人興奮的
knuckle cracking───[醫]指節斷裂；折手指
cracking qq───破解qq
cracking forums───破解論壇
cracking sound───噼里啪啦；開裂聲
cracking down───v.鎮壓；打擊；處罰；制裁
cracking bones───裂骨
cracking knuckles───關節斷裂
cracking kid───快活小子
Increase external restraint will reduce to some degree the effect of preventing hot cracking by trailing intense cooling.───加大外部拘束會在一定程度上削弱隨焊激冷防止熱裂紋的效果。
The results showed that TCS steel had good cold cracking resistance and crystal hot cracking resistance.───結果表明，TCS鋼具有良好的抗冷裂敏感性和抗結晶熱裂敏感性能。
The different microstructure caused higher welding hot cracking susceptibility of a alloy.───兩種合金焊縫組織的差異造成A合金有更高的焊接熱裂紋敏感性。
at the end of the alloys solidification, a "shock shrinkage" occurs, which leads to the hot cracking.───在合金凝固后期，存在一“沖擊”收縮，是“沖擊”收縮導致了合金凝固過程熱裂的產生。
Hot cracking in aluminum alloys is primarily due to the chemistry of the alloy and the weld bead.───鋁合金的熱裂最初是由于合金和焊縫的化學作用。
A new method to test hot cracking in metallic alloys was proposed.───設計了一種新的合金熱裂行為測試系統。
The Influence of Electromagnetic Vibration on Hot Cracking Initiation of Aluminum Alloy Produced by Continuous Casting───電磁振蕩對鋁合金連鑄過程中熱裂紋生成的影響
Strain field analysis of weld with trailing impact rolling to control residual stress and distortion and prevent hot cracking───隨焊沖擊碾壓減小應力變形防止熱裂紋應變場分析
Mechanism of weld with trailing impact rolling to control residual stresses deformation and hot cracking───隨焊沖擊碾壓控制焊接應力變形防止熱裂紋機理
The creature oil is a fuel of environmental protection, it is produced with straw material, using the crafts of the hot cracking and liquefying etc.
Hot cracking in aluminum alloys is primarily due to the chemistry of the alloy and the weld bead.
The reasons of hot cracking susceptibility are analyzed through electronic-scanning, electronic-probing and energyspectrometric methods on the patterns of fracture surface of hot crack and base metal.
Alloys that are extremely susceptible to hot cracking are not considered appropriate for structural (load-carrying) applications, and are generally put in the non- weldable category.
The authors believe that water accumulated on the surface of adhesion bridge neck from the sand-resin surface and atmosphere is a very factor to hot cracking tendency of resin coated sand.
The results showed that TCS steel had good cold cracking resistance and crystal hot cracking resistance.