青年中文青年中文

load shedding的意思

load shedding中文翻譯:

卸載,減載;甩負荷

相似詞語短語

shedding───v.去除;(使)落下;掉落;蛻(皮);脫(毛);脫(衣);具有防水特性;散發出光;造成傷亡;把車停在庫棚內;(意外地)散落;切斷(電力載荷)(shed的現在分詞)

load───vi.[力]加載;裝載;裝貨;vt.使擔負;裝填;n.負載,負荷;工作量;裝載量

shedding season───脫落季節

shedding tears───流淚

shedding through───穿過

shedding light───闡明;使某事容易理解;揭示

load board───搭載基板

docker load───碼頭裝卸工

load more───加載更多

雙語使用場景

But frustratedSouth Africans have been warned that periods of occasional blackouts,euphemistically known as “load shedding”, will be a fact of life for at leastanother five years.───但目前南非還束手無策,已被警告至少未來五年內將多次間歇性斷電,美其名曰“減少電網負荷”,電荒問題將在人們生活中如影隨形。

Thus the sum of load-shedding cost in all load shedding buses is determined as the minimum load-shedding cost of the system.───此時,所有切負荷節點上的切負荷費用之和即為系統最小切負荷費用。

For exerting the functions of the automatic under-frequency load-shedding device, setting for the device should be calculated correctly.───為有效發揮自動低頻減負荷裝置的重要作用,應正確進行裝置定值的整定。

Undervoltage load shedding is one of the important means to prevent power system voltage instability.───低壓減載是解決電力系統電壓失穩的重要手段之一。

The paper analysed and summarized the research status of the under frequency load shedding, pointed out the crucial issues.───本文分析綜述了電力系統低頻減載的研究現狀,指出低頻減載研究的關鍵問題。

A gas load shedding for three days for textile industry is fatal to the growth of industry as well as exports from the country, he added.───他進一步表示,對紡織行業每周削減天然氣三天對整個行業的成長來說是致命的,對整個國家的出口而言,也是致命的。

This paper solved this problem from two aspects including optimizing operator schedule and performing load shedding.───從操作符的優化調度和負載脫落兩個方面研究了這一問題。

英語使用場景

Underfrequency load shedding (UFLS) is a widely accepted effective measure to repress further frequency drop. Most of UFLS schemes use pre specified steps based on measured frequency to shed load.

A technique to prevent this is load shedding by rolling blackout or voltage reduction brownout.

Load shedding is , in essence, the load redistribution in cracked components.

Thus the sum of load-shedding cost in all load shedding buses is determined as the minimum load-shedding cost of the system.