load stress的意思

load stress中文翻譯：

[力]荷載應力

相似詞語短語

stress───n.壓力；強調；緊張；重要性；重讀；vt.強調；使緊張；加壓力于；用重音讀；n.(Stress)人名；(意)斯特雷斯

load───vi.[力]加載；裝載；裝貨；vt.使擔負；裝填；n.負載，負荷；工作量；裝載量

alternating stress mean stress───交變應力平均應力

shear stress───[力]剪應力；[力]剪切應力；剪應力; 切變應力; 切應力; 粘性摩擦應力

financial stress───資金緊張；財務壓力

residual stress───[力]剩余應力；殘余應力

M stress───M應力

proof stress───[力]彈性極限應力；試驗應力；耐力；彈性極限應力，耐力，試驗應力; 屈服點

ease stress───緩解壓力

雙語使用場景

By setting up finite element model, the load stress and the warping stress of the two materials pavement are calculated and compared.───建立有限元模型，計算配置兩種材料道面的荷載應力與翹曲應力并進行比較。

Thermal stress calculation of no-crack concrete frame structuresThermal stress was compared with load stress and characteristic of thermal stress was analysized.───出現裂縫的混凝土框架結構溫度應力計算將溫度應力與荷載產生應力進行對比，分析溫度應力的特點。

effect of environment conditions, load stress, pollution, temperature variation on shattering rate is discussed.───分析討論了自然條件、荷載、嚴重污穢、氣溫變化等環境條件對產品自破率的影響。

during the propagation of the reflection crack, load stress is the main factor that causes the propagation.───在裂縫發展過程中，軸載是引起反射裂縫發展的主要因素。

The influencing modulus picture of load stress from asphalt layer is acquired.───研究得到了瀝青加鋪層對荷載應力的影響系數圖。

It has the load bearing stably, the supporting load stress simple, the stress is lower and so on the merit, which has the higher use value.───其具有承載穩定、支承載荷受力簡單、應力較低等優點，具有較高的使用價值。

The surface mounting sensors have the advantage of being replaced, but they can not solve the issue of monitoring dead load stress.───表貼傳感器具有可更換的優點，但不能解決恒載應力監測問題。

A type of work item that records a constraint on the system such as performance, load, stress, security mechanism, or platform.───一種工作項類型，它記錄對系統的約束，如性能、負載、壓力、安全機制或平臺。

英語使用場景

The experimental results indicated that with the increase of load, the load displacement, load stress curves of point supported mid hollow and laminated glass approached to be linear.

Thermal stress calculation of no-crack concrete frame structuresThermal stress was compared with load stress and characteristic of thermal stress was analysized.

Under the same bending load, stress distribution is different from that under pure bending.

A range of tests, including full unit and systems testing, user acceptance testing, and load/stress testing, take place at the customer site.