injection temperature的意思

injection temperature中文翻譯：

噴射溫度

注射溫度

相似詞語短語

temperature───n.溫度；體溫；氣溫；發燒

alegar injection───阿萊加注射液

amnios injection───羊膜注射

critical temperature───[物][電子]臨界溫度；n.臨界溫度

cash injection───資金注入

direct injection───直接射油，直接注入；[動力]直接噴射；直接注入；直接射出法

temperature outside───室外溫度

temperature rise───[電]溫升；溫度上升；溫度上升，溫升，升溫

corticosteroid injection───皮質類固醇注射

雙語使用場景

influences of melt injection temperature, injection time, gate location and materials property on the filling process were studied and the reasonable results were attained.───考察熔體注射溫度、注射時間、入口位置、材料性質對充模過程的影響，得到優化充模結果；還考察了氣體輔助注塑過程熔體預注射量、氣體注射壓力對充模過程的影響。

Higher injection temperature makes flame lift-off length decrease uniformly and asymmetry increase slightly.───初始噴油溫度的升高會造成火焰浮起長度的減小，但不對稱性的變化并不明顯。

The influences of injection pressure and injection temperature, two important injection parameters, were studied.───研究了注射壓力和注射溫度這兩個重要的注射參數對注射坯體質量的影響。

At any given element spacing, the minimum stable operating hydrogen injection temperature varied linearly with face coverage.───對于任何給定的單元間距，穩定工作的最低氫噴射溫度隨噴注面覆蓋而線性地變化。

oil displacement efficiency of hot-water flooding increases with the rising of water injection temperature;───熱水驅驅油效率隨著注水溫度的升高而增加；

Optimization of resin injection temperature for RTM process───RTM工藝樹脂注射溫度優化

New Type of Vortex Injection Temperature Reducer───介紹一種新型旋流噴射減溫器

英語使用場景

The effects of gas chromatographic conditions on decomposed products of trichlorfon, e. g. injection temperature, injection mode and oven ramp, were studied.

The results of the calculation and the analysis of effects of combustion chamber pressure, mixture ratio, propellant injection temperature and injector type on the combustion processes are reported.