青年中文impact toughness的意思
impact toughness中文翻譯：
[力]沖擊韌性
toughness───n.[力]韌性；強健；有粘性
impact───vi.影響；撞擊；沖突；壓緊（on，upon，with）；vt.擠入，壓緊；撞擊；對…產生影響；n.影響；效果；碰撞；沖擊力
tensile toughness───斷裂韌性
fracture toughness───斷裂韌度；[力]斷裂韌性
profound impact───深遠影響
impact book───影響書
asteroid impact───小行星撞擊
impact drill───沖擊式鉆機，沖擊鉆
economic impact───[經]經濟影響
Through heat treatment, material hardness and strength increase, but impact toughness decreases.───熱處理后，材料的硬度和強度均有提高，但沖擊韌度下降。
Inclusion is harmful to impact toughness.───夾雜物對沖擊韌性不利。
We research and manufacture impact toughness cement additive.───研制出了抗沖擊韌性水泥外加劑。
The yield strength, tensile strength and impact toughness of the material after iron plated do not obviously reduce.───鍍鐵后材料的屈服強度、拉強度和沖擊韌性值未發生明顯下降。
Low temperature impact toughness of cast steel used for angle casting of container is important to guarantee quality of container.───集裝箱角件用鑄鋼的低溫沖擊韌性是保證集裝箱品質的重要性能；
By different temperature normalizing, the weld microstructure changes to ferrite and carbide, impact toughness increases significantly .───經不同溫度正火處理后，焊縫組織變為鐵素體+碳化物，且沖擊韌度明顯增加。
What's more, it owns high tensile strength, bending modulus and impact toughness as well.───具有很高的拉伸強度，變曲模量和沖擊韌性。
Impact toughness increases first and then decreases after annealing. Toughness remains increasing after quenching and tempering.───沖擊韌性在退火態下先升高后降低，而在淬火回火態下一直升高。
Tensile strength and impact toughness of steel contained tin could be developed with the increase of cerium content.───含錫鋼的抗拉強度和沖擊韌性隨鈰含量的增加而升高。
Abrasive ratio, thermal stability, impact toughness and cohesive strength are main performance figures of PDC.
The relationship between impact toughness and tempering temperature indicated secondary tempering brit - tleness peak at between 570 - 580.
The corrosion weight loss rate and impact toughness of high Mn steel in hot concentrated caustic solution were studied by using immersed corrosion, impact test and SEM.
The effect of hot deformation amount on impact toughness for Vanadium white cast iron was studied.
The extra-cryogenic impact toughness and influence factors of the high-Mn austenitic steel are studied by means of the Charpy V-notch impact test and the SEM fractured appearance analysis.
Both hardness and impact toughness of the granular pearlite are better than that of lamellar pearlite, but the latter has a better wear resistance.
With increasing austempering temperature, the impact toughness and hardness of the high alloy white cast iron decrease.
It was found that impact toughness of weld metal was maximum using carbon arc air gouging, and it was minimum using acid backing.
The result showed that after adding grain refiner, the hardness of magnesium alloys changed little while the impact toughness increased.