isolation layer的意思

isolation layer中文翻譯：

絕緣層

隔離層

相似詞語短語

isolation───n.隔離；孤立；[電]絕緣；[化學]離析

layer───vt.把…分層堆放；借助壓條法；生根繁殖；將（頭發）剪成不同層次；n.層，層次；膜；[植]壓條；放置者，計劃者；vi.形成或分成層次；[植]通過壓條法而生根

splendid isolation───光榮的孤立（以前的英國外交政策，表示不卷入歐洲政治旋渦）；光輝孤立

isolation forest───隔離林

isolation ward───n.隔離病房

isolation valve───[機]隔離閥；[化] 隔離閥

outer layer───外層（細胞次生壁外面的一層）

alkaloids isolation───生物堿分離

dense layer───[醫]致密層

雙語使用場景

Isolated seismic response depends mainly on the stiffness of isolation layer and the elastic-plastic properties.───隔震結構的地震反應主要取決于隔震層的剛度和彈塑性性能。

But for the different positions of isolation layer, the damping effect of the structures also differ very obviously.───但因為隔震層位置的改變，結構的減震效果也產生了很大的變化。

turbulent convection and wall radiation in channel and the thermal conduction in isolation layer are solved simultaneously.───通道內氣流湍流對流換熱、壁面間輻射換熱與隔熱層內導熱耦合求解。

B Review condenser pick-cylinder size, puts up the scaffolding, check the condenser bundle isolation layer to protect intact or not.───B復查凝汽器接缸尺寸，搭設腳手架、檢查凝汽器管束保護隔離層完好與否。

The coupled heat transfer in the air cooling channel and thermal isolation layer of an aeroengine is investigated numerically.───數值研究了某飛機發動機外側冷氣道與隔熱層的耦合傳熱過程。

The seal (5) is torn for usage, then pushing and pressing along the arrow head direction (6) by hand, to break up the isolation layer (3).───使用時撕開封條（5），以手動方式從外部沿箭頭方向（6）推壓，造成隔離層（3）破裂。

After pouring isolation layer (Ballard handling) drum and then really copperizing and electroforming as defined by the form.───不緯澆注分隔層（巴拉德辦理）的滾筒再鍍銅的歷程本質上與電鑄所界說的步地不同。

Setting isolation layer is a new technology between superstructure and substructure of project, which can reduce earthquake damage.───在工程的上部結構與下部結構之間設置隔震層是減輕工程結構地震破壞的新技術。

英語使用場景

The seal (5) is torn for usage, then pushing and pressing along the arrow head direction (6) by hand, to break up the isolation layer (3).

Single shell lining is a reflection of the mechanical concept, namely, the lining without isolation layer which can well bare the external applied load together.

Walnut sticks intradermal more tannin, easy to form an isolation layer interface.

For devices formed on an oxide isolation layer, the poly- filled trench desirably penetrates this isolation layer thereby improving thermal conduction from the active regions to the substrate.

Base-isolation structure sets up the isolation layer which generates a larger deformation. Base-isolation structure's vibration period has increased and seismic response of superstructure has reduced.

Variation wave (VW) could not be transmitted to stock from scion before isolation layer broken and callus interdigitation.