longitudinal strain的意思

longitudinal strain中文翻譯：

線向應變

相似詞語短語

longitudinal───adj.長度的，縱向的；經線的

strain───n.(Strain)人名；(英)斯特蘭；n.張力；拉緊；負擔；扭傷；血緣；vi.拉緊；盡力；n.（植物、動物的）品種；種類；vt.拉緊；濫用；濾去；竭力

longitudinal study───縱向研究; 縱貫研究

hag strain───和應變

fearful strain───可怕的緊張

groin strain───腹股溝拉傷

longitudinal approach───縱向進近

longitudinal survey───縱向調查；貫時性調查研究；縱向面調查

andromeda strain───安德羅美達菌株（書名）

雙語使用場景

relative longitudinal strain between the strip edge and strip center is very small in the whole deformed zone, which can prevent appearing crinkling and bloating.───在整個變形區內板帶邊緣和中心的縱向相對應變較小，可以防止邊緣出現起皺、鼓包。

From 0 load till about 0.8 times the ultimate load bearing capacity, the steel tube longitudinal strain distribution along the depth of cross-section obeys the plain section assumption.───從加載之初直到大約0.8倍的極限承載力，試件縱向應變沿截面高度的分布基本符合平截面假定。

the results, during of the axisymmetry deformation, longitudinal anisotropy and transversal isotropy of polycrystal were obvious with the effective strain increasing.───結果表明，在軸對稱變形過程中，隨著等效應變的增加，多晶織構顯現出明顯的橫觀各向同性及縱向各向異性。

The vibration of 3rd order and 11th order working roll has a large longitudinal strain, which affects the rolling thickness;───工作輥的第3階和第11階振型縱向變形較大，造成較大輥縫，對軋制厚度影響最大；

英語使用場景

Base on experiment results, the bernoulli's assumption is taken for the longitudinal strain distribution in shallow section shear wall structures (SSSW).

The results indicate that in venae impotence it might be useful to reduce the longitudinal strain of the tunica albuginea by making the longitudinal fibers...

When the longitudinal strain is much less than the coronary, the restriction to the emissary veins becomes stronger.

From 0 load till about 0.8 times the ultimate load bearing capacity, the steel tube longitudinal strain distribution along the depth of cross-section obeys the plain section assumption.

The results indicate that in venae impotence it might be useful to reduce the longitudinal strain of the tunica albuginea by making the longitudinal fibers stronger.

The relative longitudinal strain between the strip edge and strip center is very small in the whole deformed zone, which can prevent appearing crinkling and bloating.

The largest strain elongation direction pattern corresponds to the description of folds with combined tangential longitudinal strain and layer parallel shear.

A new method is proposed to determine the excited torque and bearing load of the injection pump camshaft by means of measuring the longitudinal strain in the bottom part of the plunger.