ovality的意思

ovality中文翻譯：

n.橢圓；橢圓度；卵形

相似詞語短語

jehovah nissi───羔羊

bilocular ovarian cyst───雙房卵巢囊腫

allomer capital innovation───allomer資本創新

removable discontinuity───[數]可移不連續性；可去不連續點，可去不連續性

blackhead removal───黑頭去除

excrescences ovarian───卵巢排泄物

regulatory approval───注冊審批；監管批準

cestode ova───絳蟲卵

removable vinyl───可拆卸乙烯基

innovations now───立即創新

雙語使用場景

Practice shows that both ovality and eccentricity affect the casing collapse resistance obviously.───實踐證明，不圓度和壁厚不均度對套管抗擠強度的影響是相當可觀的。

cross-section distortion of bent tube is very small by using ball filler push bending process, with the ovality less than 1.5%.───運用珠粒填料推彎成形工藝成形出的管材截面畸變程度很小，橢圓度不超過1.5%。

Casing, cement and formation plane strain mechanical model are established, considering casing with initial ovality.───套管的不同初始橢圓度建立了套管、水泥環、地層平面應變力學模型。

Acceptable ovality for refractory performance is derived empirically from many years of observation.───對耐火磚襯可接受的橢圓度只可來通過多年觀察得來經驗取得。

The bended part of a tube has the ovality less than 2%, smooth inside wall without folding and even outside wall thickness without crack.───彎管部位管材的橢圓度小于2%，內壁光滑無皺褶，外部壁厚均勻無開裂。

The errors of the stand-off measurement and measurement errors made by pitch diameter gauge and ovality gauge are analyzed and compared.───分析比較了緊密距測量以及中徑和橢圓度量規測量的誤差。

Casing, cement and formation plane strain mechanical model are established, considering casing with initial ovality .───針對套管的不同初始橢圓度建立了套管、水泥環、地層平面應變力學模型。

Ovalisation meters measuring ovality during the test were used in the full scale testing, however.───在該測試中用于測量橢圓度的成橢圓形儀表也可用于大型的測試，但是。

Lacking internal support in the pipe, this pipe bending process creates some cross section ovality.───在管道內支持不足，這根管子彎過程中創造一些截面橢圓。

英語使用場景

The cross-section distortion of bent tube is very small by using ball filler push bending process, with the ovality less than 1.5%.

Briefed in the paper are the characteristics, work principles and operation procedures of the pitch diameter gauge and ovality gauge used to check coupling threads.

According to the regressive equation being presented and the simulation results, the effect rules of process parameters on the ovality and optimal combination of process parameters were obtained.

The errors of the stand-off measurement and measurement errors made by pitch diameter gauge and ovality gauge are analyzed and compared.

In order to get the complex surface of piston skirt with barreled profile and varying ovality, a kind of arithmetic which can simply get a cubic curve was given.

Deviations of ovality, perpendicularity and partial concave - convex on large - scaled storage tanks are inevitably in construction.