interference fit的意思

interference fit中文翻譯：

過盈配合；干涉配合；緊配合

相似詞語短語

fit───vt.安裝；使……適應；使……合身；與……相符；adj.健康的；合適的；恰當的；準備好的；vi.符合，配合；適合；合身；n.合身；發作；痙攣；n.(Fit)人名；(捷、羅)菲特

unlawful interference───[法]非法干預

interference pattern───干涉圖樣；干涉圖（樣）

destructive interference───相消（性）干擾，破壞性干擾；[光]相消干涉，[光]相消干擾；破壞性干擾

interference engine───干擾發動機

interference colors───干涉色；干擾色

constructive interference───（全息）結構干涉，相長干涉；[物]相長干涉，結構干涉；建設性干涉

radio interference───射電干擾，無線電干擾；[通信]無線電干擾；射電干擾

fit notes───調整注釋

雙語使用場景

The rotor shall have an interference fit to the shaft and the rotating assembly shall be dynamically balanced to ISO 1940, G. 6.3.───定子應該通過壓配合與軸結合在一起，旋轉總裝動態平衡應該符合ISO 1940， G.6.3標準。

To prestressed sleeve, prestressed produced through interference fit between sleeve and crack pipeline.───對預應力管道，預應力通過套管與裂紋管道過盈配合方式產生。

The interference fit between the gate and seat provides bubble tight shutoff even under the lowest pressure.───即使在最低的管線壓力下，閘板與閥座之間的配合也能夠實現氣泡級密封功能。

Bearings with a tapered bore are always mounted with an interference fit .───帶圓錐孔軸承始終以過盈配合安裝。

For bearings having a tapered bore , inner rings are always mounted with an interference fit .───對于圓錐孔軸承，內圈的安裝始終采用過盈配合。

The mating surface of the rod and bearing cap form a rough surface (interference fit) that eliminates the need for centering sleeves.───該桿和軸承蓋形成粗糙的表面（盈），減少了對中心袖子需要交配的表面。

Interference fit is required between outer ring and housing as the load is varying in direction relative to the outer ring.───外圈與軸承座之間需要過盈配合，因為相對于外圈的負荷方向有變化。

This paper deals with designed theory and method for interference fit between plastic shaft and plastic hub.───陳述了塑料實芯軸與孔座間過盈連接的設計理論和方法。

The planet gear shafts and the axis holes of the planet gears are connected under an interference fit.───行星齒輪軸與行星齒輪的軸孔之間為過盈配合。

英語使用場景

The article analyzes the failure cause of heavy interference fit with temperature difference assembly method, and bring fundamental principles to avoid the problem in assembly technique.

The planet gear shafts and the axis holes of the planet gears are connected under an interference fit.

This work studies the maximum equivalent stress on the component and the allowable amount of interference for an interference fit based on the maximum distortion energy theory.

But the interference fit by hydro form result in the damage occurring on the contact surface.