length measurement的意思

length measurement中文翻譯：

長度測量

相似詞語短語

measurement───n.測量；[計量]度量；尺寸；量度制

length───n.長度，長；時間的長短；<語>音長

carat measurement───克拉測量

measurement chart───尺碼表

measurement error───[測]測量誤差；量度誤差

girth measurement───周長測量

span length───桿間距離，跨度距離；跨度距離；桿間距離

equal length───[統計]等長；[統計] 等長

discontinuous measurement───不連續測量

雙語使用場景

On line length measurement of steel tube is the key point for continuous rolling.───鋼管管材長度的在線檢測是實現熱連軋的基礎。

A flame length measurement method is introduced in this paper.───提出了一種火焰長度的測量方法。

Computer simulation is put up to analyze the effect of randomly holding points on cotton length measurement.───計算機模擬的方法，分析了夾持點漲落對測量棉纖維長度的影響。

It has shown that the length measurement system can meet the demands of the process completely and come up to API international standards.───實踐證明，該測長系統可完全滿足生產工藝過程的要求，達到API國際標準。

On the basis of thin-lens focal length measurement experiment, the imaging law of refraction-reflection system was further studied.───在薄透鏡焦距測定實驗的基礎上，進一步討論了折射反射系統成像的規律。

The method of pipe length measurement system is elaborated including the constitution, measure principle, as well as measuring process.───論述了測長系統的實現方法，介紹了測長系統的組成、測長原理、工作過程。

The different time radiography, bone length measurement values different, in that the same should be removed.───不同時間攝片的月狀骨長度測量值不同，在進行同一認定時應剔除。

Finally, the hardware and software of the automatic steel pipe length measurement system employed PLC are designed.───最后介紹了以PLC為控制核心的鋼管測長系統硬件和軟件的構成和實現。

System test shows that the designed system can meet the need of high precision length measurement in iron and steel enterprises.───系統測試表明，所設計的系統可以滿足鋼鐵企業對長度的高精度測量。

英語使用場景

Bear in mind that all sections must add up to the overall length measurement.

You will need to cut all fabric drops to the total length measurement as at the centre of the window.

The method and equipment for wave length measurement using the isochromatic spectrum is introduced, and some approaches for improving measurement precision are discussed too.

Introduces the rationale and techniques of common normal length measurement in the test and mapping of parameters for gears.

Through an experiment for free-form surface measurement, the approach is proven to be simple for parameter computation and its relative error for space length measurement is better than 0.56%.

The errors of intraocular lens power calculation may be caused by inaccurate axial length measurement or unstable keratometric reading.

The feasibility of taking strained-wire as navigating datum line of dummy guide-way was analyzed in laser length measurement system, and working principle of the system was presented.