青年中文青年中文

peel strength的意思

peel strength中文翻譯:

剝離強度

相似詞語短語

strength───n.力量;力氣;兵力;長處

peel p50───剝p50

shear strength───切變強度

chemical peel───化學換膚;化學剝脫術;[醫]化學脫皮術

sapped strength───磨損強度

for peel───對于剝離

lemon peel───檸檬皮

phenol peel───苯酚皮

peel case───果皮盒

雙語使用場景

strength between aluminium and the grafted polyethylenes was measured .───酸酐功能化的聚乙烯與鋁的粘結強度最高。

effect of different surface treatment on peel strength of substrate has been investigated.───研究了不同的表面處理方法對基板金屬化剝離強度的影響規律。

effect of the residual stress on the peel strength P/b is discussed.───結果還表明,膜內殘余應力的存在降低了剝離強度。

This article, the most common difference Peel strength as an example, jointly conducted analysis with you.───本文,就以最為常見的剝離強度差為例與大家共同進行分析探討。

With polyether polyurethane as the main body the hot melt adhesives has good flexibility, poor adhesive peel strength and heat resistance.───以聚醚為主體的聚氨酯熱熔膠雖然柔韌性得到改善,但膠黏劑的剝離強度,耐熱性又較差。

In the case of composite materials, the Peel strength is an important quality metrics.───對于復合材料而言,剝離強度是其重要的質量評價指標。

Aerospace. Thermosetting resins, prepreg based composite materials. Peel strength.───航空和航天.熱固性樹脂預浸合成材料.耐剝離強度試驗

However, polyethyleneimine wet peeling strength and resistance to deformation of the peel strength are poor.───但是,聚乙烯亞胺的耐濕剝離強度和耐殘余變形的剝離強度較差。

there will be a small amount or a large number of solvent residue in printing ink layer, by may cause complex hierarchical to peel strength.───不當的話,就會有少量或較大量的溶劑殘留在油墨層中,復合后可能會造成復合膜的分層,使剝離強度變差。

英語使用場景

The effects of N-methyl pyrrolidinone(NMP) on viscosity and stability of aqueous polyurethane emulsion, water absorbing ratio, contacting angle of glue film and T peel strength were studied.

High Copper Peel Strength and Excellent Alkaline Resistance.

The reason why A have a low peel strength is the lower cohesive energy of A.

Tightsen structural adhesives have excellent tensile, shear and peel strength maximum impact stress and vibration resistance.

In the case of composite materials, the Peel strength is an important quality metrics.

The adhesive is nontoxic and has excellent peel strength to SBS materials and leather.

Waterborne acrylic pressure - sensitive adhesives ( PSAs ) with low peel strength were prepared by the semi - continuous emulsion polymerization.

The adhesive technique with great cohesion and peel strength.

This article, the most common difference Peel strength as an example, jointly conducted analysis with you.