metal thickness的意思

metal thickness中文翻譯：

金屬厚度

相似詞語短語

sheet metal thickness───金屬板厚度

thickness───n.厚度；層；濃度；含混不清

corneal thickness───[醫]角膜厚度

slice thickness───[醫]層面厚度

cornea thickness───角膜厚度

thickness gauge───厚薄規，測厚儀；厚度計

girdle thickness───腰厚度

coating thickness───[電] 涂膜厚度

metal───vt.以金屬覆蓋；n.（Metal）（捷、瑞典）梅塔爾（人名）；n.金屬；合金；adj.金屬制的

雙語使用場景

The result showed that notch was disadvantageous to the strength of joints, and the optimal value of filler metal thickness existed.───結果表明，鋼體上開工藝槽導致焊后殘余應力增加，對接頭強度不利；釬縫厚度存在一最佳值。

Sedimentary speed: unit time parts deposition on the surface of the metal thickness.───沉積速度：單位時間內零件表面沉積出金屬的厚度。

effects of joint shapes and filler metal thickness on the distribution of residual stress were researched.───研究接頭形狀、釬縫厚度對焊后殘余應力的大小及分布規律的影響。

The effects of joint shapes and filler metal thickness on the distribution of residual stress were researched.───研究接頭形狀、釬縫厚度對焊后殘余應力的大小及分布規律的影響。

Burr height can't exceed 5% of metal thickness and burr side to be inside.───毛刺高度不可超過材料厚度5%，并且毛刺方向向內。

For Combination Qualification, The Deposited Weld Metal Thickness Shall Be Recored For Each Filler Metal Process Used───對于組合評定，應記錄每種填充金屬或焊接工藝和熔焊焊縫金屬厚度。

Test method for vacuum-deposited metal thickness--Electric resistance method───真空金屬鍍層厚度測試方法電阻法

Thinning Ratio Analysis of Sheet Metal Thickness───材料變薄率分析

英語使用場景

Large (. 25" high), easy to read 6-digit non-resettable totalizing counter. Provides precise indication of current consumed. Ideal for metal thickness control monitoring."

It is shown that the metal thickness effect on the Q-factor depends on the diameter of the innermost turn in a planar spiral inductor.

General note:The "Thickness of Weld Metal" is the total weld metal thickness deposited by all welders and all processes in the test coupon exclusive of the weld reinforcement.