penetration depth的意思

penetration depth中文翻譯：

[電子][制冷]穿透深度；有效膚深

相似詞語短語

penetration───n.滲透；突破；侵入；洞察力

depth───n.[海洋]深度；深奧

great depth───大縱深；大深度

penetration rate───穿進速率，焊透率；焊透率；[機]穿進速率；進尺速度

penetration pricing───滲透定價法

midship depth───船中深度

axially depth───軸向深度

moulded depth───[船]型深；模深

total depth───全深比；全齒高

雙語使用場景

The maximum penetration depth of gas flow is increased with the increase of gas momentum while the diameter of oxigen gunjet keeps constant.───氣流的最大穿透深度隨氣體動量的增加而增加，而氧氣噴槍的直徑保持恒定。

overall stability of structure depends on the accuracy of penetration depth and internal stress.───的入土深度和內力是否準確關系到整個碼頭結構的穩定性。

The regression of the experimental data yields the correlation of jet penetration depth.───最小二乘回歸，得到了射流深度的關聯式。

The total penetration depth on per unit area was not sensitive to the charge ratio, only slightly increasing as the charge ratio increased.───紙靶單位面積上的總穿深對裝藥比不敏感，隨裝藥比的增大略成線性增大的趨勢。

Penetration depth was a function of dielectric property positively correlated with temperature.───穿透深度是介電性質的函數，與溫度呈正相關。

According to the adhesive paper between the penetration depth and the cutin of thickness, it also bond rate of wood are the same.───根據膠粘劑在紙張之間滲入的深度及所形成膠膜的厚度不同，其粘結率度也木相同。

The penetration depth shall not be evaluated but the joint must be welded without any lack of fusion.───不評估熔深，但焊縫必須完全熔合，沒有虛焊。

to the relatively small thermal penetration depth within the workpiece and the continuous removal of grinding chips.───由于在工件內相對較小的熱滲透深度和不斷去除的磨削碎片

The penetration depth decreases with the increase of initial attack angle at the same velocity, which appears a linear relationship.───相同速度下，隨著初始攻角的增大侵徹深度變小，基本呈線性關系。

英語使用場景