main failure的意思

main failure中文翻譯：

主要故障

相似詞語短語

failure───n.失敗; 失敗的事/人; 沒做到; 故障; 破產; 歉收；n.失敗；故障；失敗者；破產

main───adj.主要的，最大的，最重要的；n.(Main)（美）梅因（人名）；n.（輸送水、煤氣等的）總管道，主管道；(themains)（水、電等的）供應，供應系統；電源插座；海洋，公海；主帆（mailsail的簡稱）；（擲骰子游戲中）叫數；斗雞比賽

main scene───主要景點；主場景；主體現場

main objectives───主要目標

business failure───經營失敗；[經管]企業破產；[經管]企業倒閉

failure notice───系統退信；發送失敗通知

boot failure───自舉失敗；啟動故障

mechanical failure───[機]機械故障

brittle failure───脆斷，脆性破壞；脆性破壞；脆性疲勞；脆性失敗

雙語使用場景

But the main failure state is fatigue flaw.───然而它的主要失效形式是疲勞斷裂。

The main failure mode were wear or tipping.───的失效形式主要是磨損及崩刃。

The main failure mode of spherical plain bearings is wear.───關節軸承的主要失效形式是磨損。

For all the fuss about Britain, the main failure in Brussels was to draw up a plan to save the euro.───英國造成的麻煩中，最主要的失敗是沒能在布魯塞爾制定拯救歐元的方案。

Fatigue cracking of a roller is the main failure form due to the alternate bending stress in operation.───滾圈是回轉窯最重要的支承部件，運轉中彎曲應力造成的疲勞開裂是其主要失效形式。

Corrosion is one of main failure modes of the facilities used in oil field.───腐蝕是油田設備的主要破壞形式之一。

The field investigations indicated that the main failure modes of glacial deposits slopes are landslide, collapse and debris flow.───野外調查表明，西南高山峽谷地區冰川堆積物的主要破壞形式有滑坡、崩塌和泥石流。

The experimental results show that the increasing of low-frequency noise and the voltage peak - peak random is the main failure mode.───針對本文研究對象，實驗結果表明，低頻噪聲增大及電壓峰-峰值隨機增加是其主要失效模式。

Main failure modes of shaft components of construction machinery and their remanufacturing processes are briefly described in the article.───著重介紹了工程機械軸類零件的主要失效形式及再制造方法。

英語使用場景

But the main failure state is fatigue flaw.

The main failure reasons of the inserts of cemented carbide forming tool in machining are analyzed, and the corresponding preventive measures are presented.

The main failure mode of the automobile engine cylinder is wear.

The main failure types of four row cylindrical roller bearings, used in rolling mills, are: fatigue flakings, cracks on the raceway surfaces, and the premature damage of cages.

The main failure forms, such as thermal fatigue crack and thermal ablation of die of axle box body by semi-solid squeezing forming of B grade steel were presented based on lots of experiments.

The main failure mode of the automobilecylinder is wear.

Cracks and scale off are main failure forms of high Ni-Cr centrifugal combined casting roller and has great effects on mill production.

So, the sucker rod's main failure modes are fatigue fracture and corrosion fatigue crack.

It is determined that main failure mode for failed products is bad contact through failure analysis on products, failed during life test.