non-conductive的意思

non-conductive中文翻譯：

非導電的

相似詞語短語

conductive───adj.傳導的；傳導性的；有傳導力的

non───adv.非，不；n.（Non）（美、泰）嫩（人名）

conductive adhesive───[膠粘]導電粘合劑

conductive paint───[化] 導電涂料

conductive pigments───導電顏料

conductive foam───導電泡沫

conductive deafness───傳導性聾

non statement───非聲明

non sequitur───不合理的推論或結論；n.<拉>不合邏輯的推論

雙語使用場景

It is non-conductive and does not require a burn-in time to achieve maximal efficiency.───它是不導電，不需要老化時間實現最大的效率。

Insulation Insulation is non-conductive material used to prevent leakage of electric current from a conductor.───絕緣絕緣體就是非導電材料，用來防止導體中電流的泄露。

The detection feature can be switched off when testing EUT's with non-conductive surfaces, such as plastic housings.───當測試表面無導電材料的被測件如塑料外殼時，該檢測功能可關閉掉。

Aldrin relied on a felt-tip marker, since the non-conductive tip would close the contact without shorting it out, or causing a spark.───奧爾德林當時使用的是氈制粗頭筆，它的尖頭是不導電的，接觸開關不會造成短路或引發火花。

When a voltage is applied in a second direction, the ion bridge recedes and the programmable resistor becomes essentially non-conductive.───當電壓沿第二方向施加時，離子橋消失且可編程電阻器變得基本不導電。

Made of high-density polyethylene that's lightweight, non-conductive, and non-corrosive.───由高密度聚乙烯制成，重量輕、不導電、無腐蝕性。

The jack housing includes an electrically non-conductive substrate metallized with a metal shield layer.───插座外殼包括利用金屬屏蔽層進行金屬化的不導電襯底。

Non-conductive mats should be placed in front of the switchboards and maintained in a clean condition.───閘刀盒前邊要放絕緣墊，并保持干凈。

英語使用場景

In the isolated state gallium salt and organic compounds are non-conductive but Hla and his colleagues have evidence that these two substances formed by the metal lines are superconducting properties.

A cost effective alternative requiring less expensive fabrication, infinitely mouldable polyurethane is also suited to applications requiring non-sparking and non-conductive material.

SprayCool patented two-phase liquid cooling technology uses a fine mist of non-corrosive, non-conductive liquid, sprayed in a thin layer, which evaporates and cools electronics.

It is non-conductive and does not require a burn-in time to achieve maximal efficiency.