packing gland的意思

packing gland中文翻譯：

填函料

相似詞語短語

gland packing───壓蓋填料

gland───密封壓蓋；n.腺

packing───n.包裝；填充物；v.包裝；裝滿；壓緊（pack的ing形式）

packing fraction───聚集率；[核]斂集率

customary packing───[包裝]習慣包裝

packing label───包裝標簽

packing date───包裝日期

packing density───組裝密度，存儲密度，記錄密度；[電子]組裝密度；[計]記錄密度；[計]存儲密度

insufficiently packing───包裝不足

雙語使用場景

packing gland is used to maintain compression on the packing rings.───填料壓蓋用來壓緊填料環。

The stem and packing gland are also stainless steel for corrosion protection.───閥桿和填料密封裝置同樣采用不銹鋼，具有耐腐蝕性能。

Check if the clamp-sealing torque of packing gland accords with the standard specification.───檢驗填函蓋的鉗緊扭矩是否符合標準規格。

The smooth length of brass or steel rod that moves up and down through the stuffing box or packing gland of a sucker rod pump.───用于有桿泵的經盤根盒或盤根壓蓋上下移動的一根光滑的黃銅桿或鋼桿。

Rugged construction provides years of reliable service. A two piece packing gland prevents cocking and stem damage.───堅固耐用的結構確保多年穩定可靠的使用。兩件式填料壓蓋防止壓蓋翹起和閥桿損壞。

The packing gland is stainless steel for corrosion resistance. Packing gland bolts are easily accessible for adjustments.───填料密封裝置采用耐腐蝕的不銹鋼材質。填料密封裝置的螺栓很容易被操作，以便于調節。

Gland locking device prevents loosening of the packing gland, reducing leak potential.───壓蓋閉鎖配置防止壓蓋松動，降低泄露可能性；

NOTE: If minor leakage occurs, remove lock screw, lock washer and cap and lightly tighten packing gland nut.───注：如果出現少量的泄漏，則拆卸鎖緊螺絲，然后鎖住墊圈和閥蓋，然后輕輕緊固填料壓緊螺母。

the installation of too much filler, so that packing gland packing in the above letter, resulting in displacement, abrasions stem.───填料安裝太多，使填料壓蓋處在填料函上面，產生位移，擦傷閥桿。

英語使用場景

The stem and packing gland are also stainless steel for corrosion protection.

A two piece packing gland prevents cocking and stem damage.

Stem and Disc or Disc Holder are integral. No packing gland, packing only in these sizes.

NOTE: If minor leakage occurs, remove lock screw, lock washer and cap and lightly tighten packing gland nut.

Properly press the packing gland bit wear and replace it in case of too much wear.

Check the stuffing box, the packing gland should be flatted and tensioning torque should be proper.

Expeller seals packing include expeller , pressure - relief cover, sleeve, packing water sealing ring and packing gland, etc.

Tighten up the packing gland on the swivel.

No packing gland, packing only in these sizes.