青年中文青年中文

polymer flooding的意思

polymer flooding中文翻譯:

聚合物驅

相似詞語短語

flooding───n.泛濫;產后出血

polymer solution───聚合物溶液;高分子溶液

flooding toilet───抽水馬桶

amorphous polymer───非晶態聚合物

from flooding───從洪水中

branched polymer───支鏈型高分子,[高分子]支化聚合物;分支聚合物

flocculating polymer───絮凝聚合物

synthetic polymer───[高分子]合成聚合物;合成高分子

polymer clay───軟陶

雙語使用場景

The experiment manifests that high concentration polymer flooding is a good way to enhance oil recovery.───實驗表明,采用高濃度聚合物驅油是一種較好的提高原油采收率的方法。

By limited difference method, two dimensional, two phase polymer flooding numerical model is built.───并通過有限差分方法,建立了二維兩相聚合物驅數值模型。

Cycle polymer flooding method can reduce injection pressure.───周期注聚方式可以降低注入壓力。

Spontaneous emulsification flooding efficiency is better than those of surfactant flooding and polymer flooding.───自發乳化驅油效果好于表面活性劑驅及聚合物驅。

Technology and methods set out in the mine has guiding significance to carry out polymer flooding.───闡述的技術與方法對礦場開展聚合物驅具有指導意義。

The suggestion of the performance index is of value to polymer flooding for high-temperature and high-salinity reservoirs.───該性能指標的提出對國內外高溫高鹽油藏進行聚合物驅油具有重要的指導意義。

permeability and viscoelasticity of polymer solution to the shape and characteristic of the relative permeability curve in polymer flooding.───研究了巖心潤濕性、滲透率和聚合物溶液粘彈性對聚合物驅相對滲透率曲線形狀和特征的影響。

This study shows that the main remaining potential after polymer flooding lies in thick layers with intermediate permeability.───分析認為,中等滲透率厚油層是聚合物驅后剩余油主要潛力所在。

At last, evaluating the effect of polymer flooding through the mine sites life of pilot in region of interest.───最后通過研究區的礦場先導性實驗對聚合物驅的效果進行了評價。

英語使用場景

After polymer flooding and polymer cross link micro gel flooding, the residual oil mainly distributes in middle and low permeable reservoirs. This is the potential area of EOR.

For polymer flooding system, Demulsifier selection is dependent on polymer concentrations in produced liquid.

The way to improve the effect of polymer flooding mainly depends on increasing the viscosity of polymer solution and the ability to establish the residual resistance factor.

The necessary conditions of the OCP for polymer flooding were deduced by using calculus of variations. Both continuous and discrete cases are studied.

Taken polymer flooding units in Shengli oilfield as prototype model is built and 15 dynamic influential factors and influential rules in polymer flooding are discussed.

The technology of organic cross-linked polymer flooding is studied according to the need of recoverable reserves increase in high temperature and high salinity oil reservoirs.

Inpouring polymer flooding is one important process to enhance oil recovery.

The ultimate oil recovery after polymer flooding is almost 50%. A half geological reserves remaining oil can not be swept and driven by water flooding.

Polymer flooding technics can stabilize crude oil output, but it also increases the difficulty of crude oil demulsification and sewage treatment.