maximum deviation的意思

maximum deviation中文翻譯：

[物]最大偏差

最大誤差

相似詞語短語

maximum───adj.最高的；最多的；最大極限的；n.[數]極大，最大限度；最大量

deviation───n.偏差；誤差；背離

deviation definition───偏差定義

maximum power───[化] 最高功率；[電]最大功率；最高功率

deviation mean───偏差平均值

deviation calculator───偏差計算器

absolute maximum───最大絕對值

maximum height───最大高度

consummation deviation───完成偏差

雙語使用場景

Besides a comparison of the characteristic line, the normalized mean square root error, the normalized mean error, and the maximum deviation are calculated and discussed.───除了用單行數值比較法外，還計算了重組和數學模型之間的歸一化均方根偏差、歸一化平均偏差和最大偏差。

To compare with maximum deviation method and region growing method, some results of segmentation were given. The results show that the proposed method is more effective.───將該方法與最大方差法和區域增長法進行比較，通過實例表明該方法的有效性。

experiment shows that the calculator values from the model agrees well with the experiment data and the maximum deviation is within 30%.───實驗表明模型計算值和實驗數據吻合較好，最大偏差在30%以內。

Results of improved determination method were compared with that of primary method with maximum deviation of 0. 1%.───改進前、后方法測定結果比較，相對偏差最大值為0.

Furthermore, the calculated and measured optical density distribution is in good agreement with a maximum deviation of less than 10%.───此外，計算和測量光密度分布是吻合的最大偏差小于10%。

The agreement of simulation and theoretical calculation results with each other is fairly good, maximum deviation being less than 5%.───模擬計算結果與理論計算結果的數據擬合程度較好，最大偏差不超過5%。

The experiment shows that the calculator values from the model agrees well with the experiment data and the maximum deviation is within 30%.───驗證實驗表明模型計算值和實驗數據吻合較好，最大偏差在30%以內。

The maximum deviation of temperature between model prediction and experimental testing is about 3. 3K, and average deviation is about 0. 5K.───并且界面處溫度的模型預測值與實驗測試值之間最大偏差約為3.3K，平均偏差約為0.5K左右。

Maximum Deviation and Entropy Method for Design Proposals Optimization───設計方案優選中的離差最大化及熵值法

英語使用場景

Best-fit curves, which can minimize the maximum deviation, should be used to evaluate the independent conformity of instruments and transducers.

The maximum deviation of temperature between model prediction and experimental testing is about 3.3K, and average deviation is about 0.5K.

To compare with maximum deviation method and region growing method, some results of segmentation were given. The results show that the proposed method is more effective.

Besides a comparison of the characteristic line, the normalized mean square root error, the normalized mean error, and the maximum deviation are calculated and discussed.

According to multiindex characteristics of appraised design proposals, the rational weight coefficient among them is given by using the comprehensive appraisal value of maximum deviation and entropy.

The standard deviation and the maximum deviation between the experimental results and the calculated ones from the viscosity equation of saturated liquid are 0.58% and 2.10%, respectively.