plasma arc的意思

plasma arc中文翻譯：

等離子弧，等離子體電弧；電漿弧

相似詞語短語

plasma───n.[等離子]等離子體；血漿；[礦物]深綠玉髓

arc───n.弧（度）；弧光（全稱electricarc）；弧形物；天穹；vt.形成電弧；走弧線；n.(Arc)人名；(法)阿爾克；adj.圓弧的；反三角函數的

arc flash───電弧閃光

jerboa arc───跳鼠弧

plasma membrane───質膜；漿膜（等于cellmembrane）

donating plasma───捐獻血漿

plasma cells───[醫] 漿細胞；n.[組織][細胞]漿細胞；原生質細胞

fordo arc───福爾多弧

refract arc───折射弧

雙語使用場景

The system can not only be used in pulse plasma arc welding, but also can be used in penetration controlling in plasma arc welding.───該系統不僅可以進行脈沖等離子弧焊接，而且可以實現脈沖等離子弧焊接的熔透控制。

Ordinary plasma arc cutting machine power supply.───普通等離子弧切割機的電源。

Sometimes nitrogen are being used oxygen plasma arc cutting of arcs gas.───有時氮氣還被用作氧等離子弧切割時的起弧氣體。

Many current flow through the law of metals also can be used for plasma arc.───許多電流流過金屬的規律也可用于等離子弧上。

This current rapidly heats up the fill material generating a plasma arc between the electrodes.───這個電流會迅速的激發管內的填充物，在兩個電極產生等離子弧。

Heat source device with plasma arc quenching is of great capacity for its high thermal efficiency and low cost.───等離子弧淬火熱源裝置熱效率高，成本低，有巨大的發展潛力。

So it appears to be particularly important to diagnose the thermodynamic parameters of plasma arc controlled by magnetic field.───因此，對磁控等離子體弧熱力學參數的診斷就顯得尤為重要。

plasma arc voltage feedback, position feedback, automatically shut down arc voltage in the corner.───等離子弧壓反饋，定位反饋，轉角自動關閉弧壓調高。

It reveals the relationship between the weld quality and the matching of parameters in plasma arc welding process .───從等離子電弧力的角度，探討了等離子弧焊接工藝參數及其匹配的內在聯系與規律性。

英語使用場景

This text introduces the technologic point of plasma arc welding for high temperature alloy, aluminium and aluminum alloy, titanium and titanium alloy, argentum , platinum, etc.

By using plasma arc method a copper base alloy surfacing weld was formed on steel Q235, with Sn P bronze powder with nickel base alloy powder.

In the present study, tungsten oxide nanorods were prepared by a plasma arc gas condensation technique where a gas nozzle was introduced to provide blowing gas.

By comparing backgouging of plasma arc with carbon arc to the welded joint of 13-5 martensitic stainless steel, the backgouging of plasma arc is proved feasible for the full penetration weld.

A non power supply probe was developed to detect the plasma cloud voltage, which consists of plasma arc voltage gradient and plasma sheath voltage.

The cutting quality of numerical control plasma arc cuffing machine means the gradient and the smooth of cuffing side.

But the argon plasma arc voltage, low enthalpy is not high, cutting ability is limited, and cut the air than the thickness of the cut about 25% lower.

Micro - plasma arc welding technique has a good application prospect for oral cavity repair.

The range which is cleaned up by Plasma arc became small, it tend to format oxidate slag.