plastic flow的意思

plastic flow中文翻譯：

塑性流動；塑性流；[流]范性流變；粘（滯）流（動）

相似詞語短語

plastic───n.塑料；塑料學；<非正式>信用卡；adj.塑料制的；人造的，不自然的；（物質、材料）可塑的；產生立體感的；塑性的；有創造力的；適應環境變化的

flow───vi.流; 垂; 流出; （談話、文體等）流暢；n.流動；生產，供應；車流；流量；傳播；流通；滔滔不絕；連貫，流暢；漲潮；泛濫；（蘇格蘭）濕地，沼澤；月經；vt.使泛濫; 淹沒; 排出；n.流動; 滔滔不絕; 漲潮; 連貫；v.（使）流動，涌流；流通；傳播；流暢；充滿；大量供應；漲；漲潮；川流不息；飄揚；來自，由……產生；來月經；（礦物、巖石等）變形；n.(Flow)（美）弗洛（人名）

plastic films───[塑料]塑料薄膜；塑膠膜

plastic deformation───塑性變形，柔性變形；[力]塑性變形，塑性應變

plastic bottles───塑料瓶

plastic foil───塑料薄膜；塑料薄片

corrugated plastic───波紋塑料

plastic bags───塑料袋; 塑膠袋；塑料袋；塑膠袋

molded plastic───模制塑料

雙語使用場景

Now you're clearly in that plastic flow portion.───現在你能很清楚看到，塑性流動的部分。

For vertical and inclined surface shape. No plastic flow phenomena.───用于傾斜和垂直面上成型，不會出現流膠現象。

this whole portion here is plastic flow.───這部分都是塑性流動。

The powerful stress is big enough to cause plastic strain and plastic flow on the interface which can provide good conditions for bonding.───強大的應力使材料發生塑性變形，產生塑性流動，為界面生成鍵合強度提供良好的條件；

The main reason of casing failure in most oilfields is the plastic flow in salt rock, gypsolyte and shale due to creep.───我國大部分油田套管損壞的原因主要是巖鹽層、膏巖層、泥巖層等由于蠕變產生的塑性流動而擠壞套管的。

If the stress on a material exceeds its elastic limit then it is permanently strained, the latter being brought about by plastic flow.───如果對一種材料的應力超過其彈性極限則是永久緊張，后者所帶來的塑性流動有關。

The sensitivities of the plastic flow stress to strain rate and temperature are analyzed.───分析比較了合金流變應力對溫度及應變率的敏感性。

If, when the stress is removed, the deformation remains, the material is said to exhibit plastic flow.───如果在撤去應力后變形仍保留，則稱此材料呈現塑性流動。

Increase in pressure and temperature improves plastic flow.───壓力和溫度的增加可改進塑性流變。

英語使用場景

The results show that the plastic flow of the metal material nearby contact arc area towards free surface of workpiece becomes the burr under the coupling actions of the thermal and mechanics.

The elastic-plastic increment equilibrium equation of the node in the steel frame is obtained by using the stability function element, the space yield surface equation and the plastic flow rule.

Netlike plastic flow in the lower lithosphere, as viscoplastic flow involving plastic flow network, controls tectonic deformation and dynamic processes within the continental plate.

Large—scale seismic belts andnetworks in the crustal seismogenic layer is a response to plastic—flow network in the lower lithosphere.

Based on the analysis of plastic flow law in crankshaft forming, the cause of typical forming defects, i. e. the folding existing in the crankshaft pin and crank arm was found out.

When conducting numerical analysis of plastic cracking zone of rock mass subjected to underground excavation, its results mainly depend on the adopted plastic flow criterion.

With respect to the anti-slide resistance measures of embankment on soft clay ground, loading berm method and decrease the slope of the embankment are compared using plastic flow theory.

The use of plasticized rosin as an analog material of the ductile lower lithosphere provides an effective approach to modelling intraplate plastic flow network and multi layer tectonic deformation.

Very generally, there are always two fracture mechanisms competing to break a material - plastic flow and brittle cracking.