micrometers的意思

micrometers中文翻譯：

n.微米；[機]千分尺；分厘卡；[儀]測微計

相似詞語短語

millimeters into micrometers───毫米到微米

雙語使用場景

Conventional solar cells are typically a hundred micrometers or more thick.───傳統的太陽能電池一般都是100微米厚或略厚一點。

The ions, 40 micrometers apart, float above the surface of the trap.───離子之間相隔40微米，漂浮在勢阱表面。

new life forms up close, at five micrometers.───近窺新生命形式，在5微米的尺度下。

Chinese monitoring stations around the capital track large particulates of up to 10 micrometers.───在首都的市區里，中國的監測站測量的是直徑高達10微米的較大懸浮顆粒物。

The outside micrometers are widely used for outside precision measurement and the main inaccuracies conform to ISO and GB standards.───外徑千分尺廣泛應用于外尺寸的精密測量，主要精度符合國際標準和國家標準。

The new Big Bang simulator is tiny - its width is only a few fractions of centimeters (20 micrometers).───這個新模擬的大爆炸是迷你型的，其寬度只有厘米的幾千分之一（20微米）。

The foamed article has a uniform foam cell size where the foam cell size of at least 90% of the foamed cells is 50 micrometers or less.───泡沫制品具有均勻的泡孔尺寸，其中至少90%的所述泡孔的泡孔尺寸為50微米或更小。

We review the field of thin-film silicon solar cells with an active layer thickness of a few micrometers.───我們檢討領域式薄膜硅太陽電池與積極層厚度的一個幾微米。

But I doubted whether Tony had the capacity to read blueprints and micrometers or do precision work.───但是我懷疑托尼是否能看懂設計圖或者辨認千分尺或者做一些精細的工作。

英語使用場景

And you had to sign a chit to use things like the height gauge, the big micrometers, calipers.

The wire diameter micrometers are used for measuring wire diameter in wire processing , with the advantage of easy use and direct reading.

Use of measuring equipment such as Micrometers, Calipers, Plain Limit Gauges etc is essential.

Single-mode fibres also operate at 1.3 micrometres, but they have cores only a few micrometers across.

They have a diameter of about three micrometers.

General import lead bullets are 10 micrometers or more is rustproof, aesthetics, the use of guarantees.

All three have different-shaped absorption features at wavelengths close to three micrometers.

Able to use and read vernier calipers, micrometers, depth gauges and other basic and simple machinist's measuring instrument.

Ability to use Callipers, Micrometers , Gauges, Profile Projector, Gauge Block.