plastic zone的意思

plastic zone中文翻譯：

[力]塑性區

相似詞語短語

plastic───n.塑料；塑料學；<非正式>信用卡；adj.塑料制的；人造的，不自然的；（物質、材料）可塑的；產生立體感的；塑性的；有創造力的；適應環境變化的

Zone───n.(Zone)人名；(塞)佐內；vi.分成區；n.地帶；地區；聯防；vt.使分成地帶；環繞

plastic films───[塑料]塑料薄膜；塑膠膜

plastic deformation───塑性變形，柔性變形；[力]塑性變形，塑性應變

plastic bottles───塑料瓶

plastic foil───塑料薄膜；塑料薄片

corrugated plastic───波紋塑料

plastic bags───塑料袋; 塑膠袋；塑料袋；塑膠袋

molded plastic───模制塑料

雙語使用場景

horizontal and vertical stresses are concave upward in plastic zone.───在塑性區，水平及垂直應力均是上凹的。

material in the large plastic zone has been hardened .───在大塑性區內材料已經硬化。

No secondary plastic zone was found.───未發現有二次塑性區。

The shape of dislocation-free zone is similar to that of plastic zone.───無位錯區的形狀與塑性區的相似。

There is no acknowledged formulae in precisely calculating the plastic zone size when three dimensional effect has to be considered.───現階段對于三維約束狀態下的裂紋還沒有一個公認的可以準確計算塑性區大小的公式。

The abruptness of the displacement in plastic zone is suggested to be used in the analysis of instability criterion.───以塑性區位移突變作為邊坡失穩判據，此時折減系數值即為坡體安全系數。

The construction disturbance mainly occurs within the plastic zone with the heave of ground surface as a byproduct.───施工擾動以塑性區為主，塑性區地面發生隆起。

In this method, the elastic area and plastic zone can be distinguished and the different flow rules can be considered.───該方法可以考慮彈性區與塑性區的區別，并可以考慮不同的流動法則。

Based upon the near crack-tip elastic analysis, estimates of the size and shape of the plastic zone will be developed.───根據裂紋尖端附近的彈性分析，來估計塑性區的形狀和大小。

英語使用場景

By the four boundary conditions and the method of the discrete numerical quadrature, the lengths of the plastic zone, the exit elastic zone and entrance elastic zone are calculated.

With the thickness of tensile anchor plate and the radius of plastic zone changing, the range of plastic zone and the magnitude of yield load are investigated.

There is dislocation - free zone around the crack tip which has similar shape as the plastic zone.

In terms of the role of interface layer, when the crack propagates from the stiffer side, the interface plastic zone is larger, tends to delaminate .

The main speed of laser welding is very fast and the plastic zone is considerably narrow.