residual austenite的意思

residual austenite中文翻譯：

殘余奧氏體

殘留奧氏體

相似詞語短語

residual───adj.（數量）剩余的；（物質狀態在成因消失后）剩余的，殘留的；（實驗誤差）舍去的，殘差的；（土壤）殘余的；n.（Residual）（美、阿根廷）瑞斯卓爾（人名）；n.剩余物，殘渣；殘差，剩余誤差；（付給表演者的）復播追加酬金；（地質）殘丘，蝕余山；（新車購入一定時間后的）轉售值

residual definition───殘差定義

residual value───剩余價值；殘值；殘值，剩余價值

residual stress───[力]剩余應力；殘余應力

residual calculator───殘差計算器

residual waste───殘余廢物

residual powers───剩余動力；剩余功率

residual risk───n.剩余風險

residual income───剩余收益，剩余所得

雙語使用場景

Effect of residual austenite on mechanical properties and abrasion resistance of medium Mn white cast iron was investigated.───研究了殘余奧氏體對中錳白口鑄鐵力學性能和抗磨性的影響。

martensitic and undissolved carbide contents continuously increase as the laser scanning speed increases while the residual austenite decreases.───激光掃描速度增大，試樣中的馬氏體和未溶碳化物的含量不斷增加，殘余奧氏體含量則連續下降。

Phase transformation sequence in diffusion layer and the existence of residual austenite have great effect on the distribution of residual stress.───滲層中的相變次序和殘余奧氏體的存在對殘余應力分布影響較大。

the HAZ was martensite and a small amount of residual austenite.───熱影響區為馬氏體組織和少量殘余奧氏體。

The dimensional stability of the steel is due to the control of the content of residual austenite.───尺寸穩定性的效果主要是殘余奧氏體量的控制。

The amount of residual austenite in high vanadium high speed steel was measured by ferromagnetism method.───采用鐵磁性法測定了高釩高速鋼中殘余奧氏體量。

The residual stress existed in subsurface and the amount of residual austenite were tested using XRD technique.───利用X射線衍射技術測試鋼球亞表層的應力分布和殘余奧氏體含量。

The tempering process and the sub-zero treatment can control the amount of residual austenite effectively.───回火和深冷處理工藝可以有效地控制殘余奧氏體量。

The results show that the structure of the surfacing layer was martensite, carbides and residual austenite.───試驗結果表明：焊后的堆焊層組織為馬氏體+碳化物+殘余奧氏體。

英語使用場景

The tempering process and the sub-zero treatment can control the amount of residual austenite effectively.

The difficulty to harden high-Carbon- Chromium contained iron is caused by the melting zone, which may bring two problems: tiny cracks and low hardness of residual austenite.

Effect of residual austenite on mechanical properties and abrasion resistance medium Mn white iron was investigated.

The martensitic and undissolved carbide contents continuously increase as the laser scanning speed increases while the residual austenite decreases.

The carbonide in the recarburized layer is mainly M23C6. The martensitic zone is composed of dislocation martensite, twinning martensite, residual austenite and a little carbonide.

The results show that the microstructure of the alloys system is the compound of the acicular martensite and partial residual austenite. From the matrix, the composite carbides were precipitated.