resin content的意思

resin content中文翻譯：

[樹脂]樹脂含量

相似詞語短語

resin───n.(Resin)人名；(俄)列辛；(法)勒森；n.樹脂；松香；vt.涂樹脂；用樹脂處理

content───adj.滿意的；n.（Content）（法）孔唐（人名）；vt.使滿意；n.內容，目錄；滿足；容量

carbamic resin───氨基甲酸樹脂

qes content───目錄

acetal resin───[樹脂]縮醛樹脂；聚甲醛樹脂；縮醛樹脂，聚甲醛樹脂

impregnating resin───浸漬樹脂；烘干漆；填充性樹脂

engaging content───引人入勝的內容

dammar resin───達瑪脂

synthetic resin───n.合成樹脂; 塑膠；[樹脂]合成樹脂，[樹脂]人造樹脂

雙語使用場景

Treatment of ground pulp with lipase was investigated to reduce resin content of pulp.───用脂肪酶對磨木漿進行處理，以降低漿料中樹脂含量。

It has some virtues such as less damages to GF, non pollutant to environment and easy control of resin content.───該工藝具有對纖維損傷小、不污染環境和樹脂含量容易控制等優點。

This paper introduces an improved test of soluble resin content in epoxy preimpregnated DMD material.───本文介紹了一種改進的環氧樹脂預浸DMD可溶性樹脂含量檢測方法。

In the case of resin content is too large to cover out of the product will not shine.───如膠量太大，覆出來的產品也會沒有光澤。

Furthermore, the resin content shall not be less than 35 % by volume, and there shall be adequate adhesiveness at working temperature.───此外，樹脂含量體積分數應不少于35%，而且在工作溫度要有足夠的粘合性。

The pulp has a comparatively high resin content, since the acid cooking liquor dose not remove the resinous matter found in the wood.───由于這種酸性蒸煮液不能去除木材中的樹脂類物質，所以漿料中樹脂含量相對較高。

Plastics. Phenolic moulding materials. Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state).───塑料.酚醛鑄模材料.丙酮溶物質的測定（非鑄模狀態內材料中的大致樹脂含量）

A upper resin content is too large, paper distortion water absorption, guaranteed product quality, should minimize the amount of glue.───上膠量太大，紙張吸收水分而產生變形，所以在保證產品質量的前題下，應盡量減少上膠量。

The steadiness of resin content in prepreg is the key factor to ensure the quality of the finished composite.───預浸帶的樹脂含量穩定性是保證復合材料制品質量的重要因素。

英語使用場景

The resin content also makes them particularly glossy.

Cytec offers a range of complementary products including binder coatings, low resin content films and tackifiers.

The results indicated that the intensity ratio of beta-ray I/T0 was consistent with the resin content value.

Books and periodicals on the cohesion and effectiveness of resin content, gummed coating thickness and grooving.

Single face corrugated machine speed slow increases Corrugating cord to peak cohniiand resin content.

Its tough, flexible resin content also provides an exceptionally attractive finish.

Adhesive types, resin content, wood species and fibred form affected heat-conduction in low temperature indistinctively.

The impregnating methods concerned in this paper have the advantages such as availability for different types of resin systems, prepreg with uniform resin content and higher producing efficiency, etc.