resistive load的意思

resistive load中文翻譯：

[電]電阻負載

相似詞語短語

load───vi.[力]加載；裝載；裝貨；vt.使擔負；裝填；n.負載，負荷；工作量；裝載量

load board───搭載基板

docker load───碼頭裝卸工

load more───加載更多

love load───愛的負荷

load view───負載視圖

course load───課程負擔

bacillary load───細菌負荷

fire load───[安全]火災荷載；燃燒負荷；燃料荷載

雙語使用場景

General pulsers can obtain sharp risetime only when it is used for a resistive load.───通常的脈沖發生器只是在電阻性負載時才能得到陡的上升沿。

Resistive load, power factor: 1, special alloy resistance.───阻性負載，功率因數為1 。采用特制合金電阻。

Test by minimum Vin and constant resistive load.───測試的最低輸入電壓和恒定電阻負載。

Terminator A resistive load placed at the end of a cable to prevent data signals from reflecting back into the data path.───終結器就是置于電纜終端的一個電阻負荷，用來防止數據信號又反射回到線路中去。

Buffer Amplifier An amplifier , usually in a gain of 1 or 2 , used to drive a heavy capacitive or resistive load .───緩沖器放大器一種放大器，通常可以放大1到2倍，用于驅動大容量或大阻抗負載。

The result has shown witch can perfectly match any resistive load at two arbitrary frequencies.───結果顯示，該阻抗變換器能在兩個任意的頻率點對任意電阻性負載實現理想的阻抗匹配。

Analytical Method Study on Transient Process of Resistive Load Voltage in the Rectified Filter Circuit───整流濾波電路中阻性負載電壓暫態過程的解析法研究

Common Source with Resistive Load───電阻負載的共源級

英語使用場景

Buffer Amplifier An amplifier, usually in a gain of 1 or 2, used to drive a heavy capacitive or resistive load.

Resistive load, power factor: 1, special alloy resistance.

It is suggested that, with the merits of low sensitivity, the active simulation of double resistive load LC ladder filters might be a favorable scheme for high order filter realization.

A resistive load placed at the end of a cable to prevent data signals from reflecting back into the data path.

Test by minimum Vin and constant resistive load.

Feasibility of the proposed scheme is confirmed with experimental results under resistive load and rectifier load.

After introducing piezoelectric coupling to the plunge degree of freedom (DOF) in addition to two structural damping coefficients and considering a resistive load in the electrical domain, ...

The paper gives the calculated reactive compensation power and stator frequency with respect to purely resistive load and purely inductive load under constant voltage operating condition.

The resister string DAC can't directly drive resistive load, so an output buffer is needed.