surface hardness的意思

surface hardness中文翻譯：

表面硬度

相似詞語短語

hardness───n.[物]硬度；堅硬；困難；冷酷

surface───vi.浮出水面；vt.使浮出水面；使成平面；adj.表面的，膚淺的；n.表面；表層；外觀；n.(Surface)人名；(英)瑟菲斯

durometer hardness───[力]計示硬度

hardness tester───硬度試驗機；硬度測定儀

surface data───曲面數據；表面數據；地面資料

franklinite hardness───弗蘭克林硬度

brinell hardness───布里涅耳硬度；勃氏硬度；白氏硬度；布氏硬度

schist hardness───片巖硬度

hardness black───黑色硬度

雙語使用場景

Diamond CVD coating process is introduced to increase the surface hardness of cutting tools.───為增加切削刀具表面硬度引入了鉆石化學蒸發沉淀涂層工藝。

One simple way of describing strength is in terms of surface hardness.───描述強度的一種最簡單方法是以表面硬度來表示。

Thus, these rolls require a higher surface hardness and must be hardened to a greater depth.───因此，輥子需要較高的表面硬度和較深的硬化層深度。

As the surface hardness of low carbon steel billet is rather low, when billet is blasted, pit defects will occur on its surface.───前言：低碳鋼小方坯表面硬度較低，拋丸時會在鋼坯表面留下“凹坑”缺陷。

The relationship between the surface hardness of ferromagnetic material and the intensity of Barkhausen noise was studied.───通過實驗研究了巴克豪森噪聲強度與鐵磁材料表面硬度之間的關系。

By hardness analyzing, both of the two intermetallic compounds can improving the surface hardness of the basal body obviously.───通過硬度分析，金屬間化合物涂層均明顯的提高了基體表面的硬度。

With an appropriate filling ratio, the toughness of the products, impact-resistance and surface hardness can be significantly improved.───若填充比例適當時，制品的韌性明顯改善，抗沖擊性顯著提高，表面硬度增強。

Thirdly, the surface hardness of the laser cladding coatings are much higher than the plasma spray welding coatings.───激光熔覆層的表面硬度也遠高于等離子噴焊層。

Machine coated gloss of the surface hardness on also contributed-coating surface caused by compression tool to increase the gloss.───機上涂布的表層硬度對光澤亦有影響--涂布時的加壓工具造成平滑表面，增加光澤。

英語使用場景

The plasma nitriding will improve on surface hardness and wear resistance of the piston ring.

The surface hardness of rubber object mounted on the equipment can also be tested by holding the head of the sclerometer in hand.

The surface hardness, carburized structure and thickness of the carburized layer on the TiAl-alloy obtained through the different carburization technologies was studied.

The relationship between the surface hardness of ferromagnetic material and the intensity of Barkhausen noise was studied.

The surface hardness improved greatly after multilayer film deposition.

Thus, these rolls require a higher surface hardness and must be hardened to a greater depth.

The surface hardness of medium manganese austenite steel's is increased remarkably by using the casting surface alloy.

The surface hardness medium manganese austenite steel's is increased remarkably by using the casting surface alloy.

The strength, toughness and surface hardness of medium Manganese austenitic steel have been increased greatly by casting surface alloying and complex modification.