slenderness ratio的意思

slenderness ratio中文翻譯：

[航]長細比；長度直徑比

相似詞語短語

slenderness───n.細長；苗條

slenderness effects───細長效應

slenderness moment───長細比力矩

ratio───n.比率，比例

variation ratio───異眾比率；變異比率；變速比，變速范圍

slenderness limit───長細比極限

slenderness column───細長柱

slenderness factor───長細比系數

slenderness check───長細比檢查

雙語使用場景

Tests show that the strength of column decreases as its slenderness ratio increases.───試驗表明，這種柱子的承載能力隨長細比的增大而顯著下降。

approach of equivalent slenderness ratio is recommended for calculation purpose.───計算方法宜采用換算長細比法。

problems encountered in theoretical limit analysis of columns with medium slenderness ratio are discussed.───論述了求解中長柱承載能力在理論上所遇到的若干困難。

Moreover, the influence of initial crookedness would be reduced as slenderness ratio and bending moment are increased.───初彎曲對桿件的影響隨長細比和彎矩的增大而減小；

A calculation method for equivalent slenderness ratio by a graphical method is presented.───給出了應用圖表法的換算長細比計算方法。

It is confirmed that both rise-to-span ratio and slenderness ratio influence the elastic buckling load.───指出了必須同時考慮長細比和矢跨比對屈曲荷載的影響。

however, the strength doesn't vary with slenderness ratio when slenderness ratio is greater than 2.───端部固定且長徑比小于2時，強度和平均模量隨長徑比減小而增大。

Design of Die Used for Bigger Slenderness Ratio Half Hollow Aluminium Profile───具有較大舌比的半空心鋁型材模具的設計

Experimental study on influence of slenderness ratio in concrete filled steel tubular laced columns under eccentric compression───鋼管混凝土偏壓格構柱長細比影響試驗研究

英語使用場景

It is confirmed that both rise-to-span ratio and slenderness ratio influence the elastic buckling load.

Also analyzed are the influences of CFRP ratio, angle steel ratio, slenderness ratio and eccentricity to the mechanical properties of the columns.

The bearing capacity and the ductility of a FRP-confined concrete column decrease with the increase of slenderness ratio.

The resista nce decreases intensely when the slenderness ratio of the hot molding sand layer increases.

Moreover, the influence of initial crookedness would be reduced as slenderness ratio and bending moment are increased.

It is shown that the nonlinear frequency ratio increases with the vibration amplitude and the slenderness ratio.

Test results show that not only the slenderness ratio and eccentricity ratio affect the load-carrying capacity of columns, but also the end moments as well.

Meanwhile the effects of slenderness ratio and load eccentricity on the ultimate load-capacity of slender composite columns are numerically analyzed and discussed in detail.

Some kinds of Newtons theory of collision methods is extended to calculate the supersonic and hypersonic missiles with large slenderness ratio.