shrinkage rate的意思

shrinkage rate中文翻譯：

收縮率

相似詞語短語

rate───n.(Rate)人名；(法、塞)拉特；n.比率，率；速度；價格；等級；vi.責罵；被評價；vt.認為；估價；責罵

shrinkage cavity───[機]縮孔

autogenous shrinkage───自生收縮量；自生收縮，自收縮

polymerization shrinkage───聚合收縮

flow rate───流量; 流率；[流][水文]流量；[流]流速

error rate───[計][通信]誤碼率；[計][通信]出錯率

currency rate───通貨匯率

rejection rate───廢品率，報廢率，舍棄率；[工經]廢品率；報廢率

applicable rate───[經] 適用的稅率

雙語使用場景

technology conditions that have effect on polyester shrinkage rate were discussed.───影響滌綸短纖維收縮率的工藝條件。

for a curing exothermic peak at the low shrinkage rate of new small unsaturated polyester resin.───為固化時放熱峰低、收縮率小的新型不飽和聚酯樹脂。

Composite silicate insulation material plasticity, low thermal conductivity, high temperature resistant, low pulp drying shrinkage rate, etc.───復合硅酸鹽保溫材料可塑性強、導熱系數低、耐高溫、漿料干燥收縮率小等特點。

The shrinkage rate of the injection mould for the various plastics is listed, the calculating applied examples are worked yet.───列出了各種塑料注射模的收縮率，還作了計算應用實例。

HCH-6993 for a curing exothermic peak at the low shrinkage rate of new small unsaturated polyester resin.───6993為固化時放熱峰低、收縮率小的新型不飽和聚酯樹脂。

This paper studies the self-made low profile additive and its influence on shrinkage rate and mechanical properties of UP resin.───本文研究了自制低收縮添加劑用量對不飽和聚酯樹脂固化收縮率與力學性能的影響。

The dry shrinkage rate of standard curing concrete sand mortar evidently exceeded the steam curing simples at the same age.───標養水泥砂漿的干縮率明顯大于同齡期蒸養水泥砂漿試件。

Introducing the example, volume and coverage shrinkage rate of persimmon were calculated.───并通過實例，對柿子干制時的體積收縮率和表面積收縮率進行了計算。

The effects of PET film traverse heat shrinkage rate on loss angle tangent value of capacitor charge -discharge process were introduced.───介紹了聚酯薄膜橫向的熱收縮率對電容器充放電后損耗角正切值的影響。

英語使用場景

The main quality indexes of coking wood has wood balance moisture content than unprocessed materials low around 3%, dry shrinkage rate less than 5%, superior teak 7%.

The dry shrinkage rate of standard curing concrete sand mortar evidently exceeded the steam curing simples at the same age.

Introducing the example, volume and shrinkage rate of persimmon were calculated.

The effects of PET film traverse heat shrinkage rate on loss angle tangent value of capacitor charge-discharge process were introduced.

The study results indicate that the developed alloys have good flowability, smaller shrinkage rate, good anti-cracking ability and smaller casting stress tendency.

However, this coating has disadvantages such as a long curing time, high shrinkage rate, poor performance bond, the quality of instability, and so on.