taper angle的意思

taper angle中文翻譯：

[機]錐角，錐度角；[數]尖角

相似詞語短語

taper───v.（使）逐漸變窄；（使）成錐形；逐漸變弱（或減輕）；（中央銀行）縮減資產購買；n.（點火用的）木條，紙媒；細長蠟燭；逐漸縮小（或變細）；弱光；錐形物；（比賽前）練習的減少；adj.逐漸變窄的；劃分等級的

taper relief───分級扣除稅制（英國扣除資本利得的稅收制度）

taper fade───錐度衰減

taper fit───錐度配合

corticosteroid taper───皮質類固醇錐

angle───n.角，角度；視角；立場；角鐵；（古）魚鉤；v.斜移；從……角度提供信息；釣魚；謀取

taper haircut───錐形理發

taper candle───尖燭

taper off───v.逐漸變細，逐漸停止；逐漸變細；逐漸減少；n.（長形物體的）逐漸變窄; 微弱的光; 極細的蠟燭

雙語使用場景

This method is recommended for taper turning of external and internal surfaces when the taper Angle is relatively large.───當錐角相對較大時切削外錐面和內錐面推薦使用這種方法。

Pull the tip of the movable set so that the negative taper angle of the grinding easier.───活動式拉梢之設置使負推拔角之研磨更為方便。

At present, the ring rolling technology roll one ring in one process, and the technology can't deal with stress focus on the sharp taper Angle of mandrel roller.───目前錐形套圈輾擴技術只能一次成形一件，而且由于錐形套圈錐角使得芯輥應力集中嚴重。

This method is recommended for taper turning of external and internal surfaces when the taper angle is relatively large.───當錐角相對較大時切削外錐面和內錐面推薦使用這種方法。

The need to have the taper? The biggest taper Angle for vision?───工件需要有錐度嗎？最大錐度角為幾度？

Emulation study on the taper angle of structural unit and the cushion performance for the molded paper pulp───紙漿模塑結構單元的斜度與緩沖性能的仿真研究

a suitable long reaction time may increase the taper angle of the probes;───適當延長反應時間可增大探針的錐角；

Research on Machining Methods of Tapered Rollers with Extra Large Taper Angle───特大角度圓錐滾子加工方法探討

英語使用場景

To avoid sliding that occurs in cylindrical roller thrust bearings, the taper angle of the rollers is selected so the extended contact lines intersect on the bearing axis.

In this paper, a mathematical method will be demonstrated to determine the taper angle of contact surface of C-USM.

This method is recommended for taper turning of external and internal surfaces when the taper angle is relatively large.

The bearing contact angle and the roller half taper angle are two important parameters of a large taper conical roller bearing, they influence the load and life of the bearing.

By arranging the head part of the common magnetizer to be in a taper angle shape, the clearance distance can be shortened, and the effective use length of the iron core is extended.

Smaller taper angle of collet, larger clamping power.