青年中文青年中文

three-point bending的意思

three-point bending中文翻譯:

[機]三點彎曲

相似詞語短語

three point───三點

bending───n.彎曲,彎曲度;v.彎曲(bend的現在分詞)

flatwise bending───平面彎曲

bending over───俯身;折轉

flexural bending───塑性彎曲

anticlastic bending───抗塑性彎曲

bending moment───[力]彎矩;[力]彎曲力矩;[力]撓矩;彎(曲)矩,撓矩

three───num.三;n.三,三個;adj.三的,三個的

three to three───三對三

雙語使用場景

resistance of nitrided J55 casing to sulfide stress cracking (SSC) was studied by C-ring testing and three-point bending testing under different conditions.───應力環腐蝕試驗和三(四)點彎曲試驗研究了某J 55(即石油套管)滲氮套管在不同試驗條件下的腐蝕行為,并和未滲氮套管的抗腐蝕性進行了比較。

Five specimens for three-point static bending tests, five for thickness swelling (ts) were cut from each board according to ASTM D1037-96.───五件樣品為三個點的靜電彎曲測試,五因為厚度增大(TS)從依照美國材料試驗學會D 1037 - 96的每董事會被減低。

Based on this, this article is trying to use a simple method to get new KR-resistance curve in three-point bending concrete beams. 1.───針對這點,本文嘗試用一種簡化方法計算混凝土三點彎曲梁的新KR阻力曲線。

Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method.───結構膠粘劑.用三點彎曲法通過測量粘著性測定表面特性

This integration scheme is used in an XFEM analysis to model the fracture of a three-point bending beam using the cohesive crack model.───利用基于該積分方案的擴展有限元程序,結合粘聚裂紋模型實現了對三點彎梁開裂過程的模擬。

The influence of mineral admixtures on brittle fracture of mortar was investigated through three-point-bending test.───用三點彎曲法研究了不同種類和摻量的礦物摻和料對砂漿斷裂脆性的影響。

Fracture tests for RCC three point bending specimens with different sizes were operated.───進行了不同尺寸碾壓混凝土三點彎曲試件的斷裂試驗。

The bending property of aluminum tubes partially filled with aluminum-foam was studied in the three-point bending experiment.───對泡沫鋁合金部分填充方形鋁管三點彎曲性能進行研究。

英語使用場景

AE parameters and strength of the electric ceramic materials under three-point bending load are studied.

The volume density, open porosities and flexure strength of porous silicon nitride ceramics are measured respectively by Archimedes and three-point bending methods.

The three-point bending experiments of the reinforced concrete(RC) beam strengthened with carbon fiber laminate(CFL) were carried out, and the corresponding fatigue life curve was obtained.