submerged nozzle的意思

submerged nozzle中文翻譯：

浸入式水口

相似詞語短語

submerged───v.（使）潛入水中，淹沒( submerge的過去式和過去分詞 ); 完全掩蓋，遮掩；adj.在水中的; 淹沒的; 水下的; 水下運動的；v.潛入水中（submerge的過去分詞）；使陷入；adj.水下的，在水中的

guarder nozzle───保護噴嘴

submerged wreck───沉船

nozzle spray───[醫] 噴嘴

nozzle air───噴嘴空氣

submerged definition───淹沒定義

nozzle equation───噴嘴方程

nozzle valve───[動力]噴嘴閥

dredge nozzle───挖泥嘴

雙語使用場景

The results show that the submerged nozzle ingate angle and depth of its immersion should decrease gradually with the lowering of casting speed.───結果表明，隨著拉速的降低，水口的上傾角大小和浸入深度應逐漸減小。

Selecting correctly the submerged nozzle is not only concerned with property of the nozzle but also the operation conditions.───正確選擇使用浸入式水口除與本身性能有關外，工藝操作條件也有一定的影響。

forming mechanism of the submerged nozzle clogging is investigated.───研究了浸入式水口堵塞的形成機理。

Submerged nozzle must be preheated before casting. Now, burning the coal gas is the usual preheating method.───浸入式水口在澆鋼以前必須進行充分預熱，利用燃燒的煤氣烘烤水口是常用的預熱烘烤方式。

The bearing steel production is delayed by the submerged nozzle clogging.───由于生產軸承鋼水口的堵塞，嚴重影響生產的順利進行。

and the local structure of grain near the inlet of submerged nozzle has an effect on slag accumulation process.───噴管潛入段入口處藥柱燃面的形狀對潛入段內熔渣的沉積過程具有一定影響。

Study on Synthesis of Magnesia-alumina Spinel Refractory for Inner-lining of the Submerged Nozzle for Continuous Casting───連鑄復合式水口內層用鎂鋁尖晶石質耐火材料的合成研究

Mechanism investigation and numerical simulation of slag deposition for submerged nozzle───潛入噴管背壁區熔渣沉積的機理分析與數值模擬

英語使用場景

A super-flat submerged nozzle (SEN) was developed for beam blank caster of Laigang to achieve full protection for casting.

The results show that the submerged nozzle ingate angle and depth of its immersion should decrease gradually with the lowering of casting speed.

The bearing steel production is delayed by the submerged nozzle clogging.

The forming mechanism of the submerged nozzle clogging is investigated.