tearing strength的意思

tearing strength中文翻譯：

[力]抗撕強度；撕裂強度

相似詞語短語

tearing───v.撕開；裂開（tear的現在分詞）；adj.撕裂的；痛苦的；猛烈的，極端的；極好的；暴怒的

strength───n.力量；力氣；兵力；長處

tearing off───撕下；扯掉

tearing into───猛攻

tearing up───撕毀；撕碎；拉掉

shear strength───切變強度

annular tearing───環狀撕裂

lamellar tearing───層間撕裂；層狀撕裂

sapped strength───磨損強度

雙語使用場景

When webs weight increases, rupture strength, tearing strength and bursting strength are increased.───隨著纖網定量的增加，斷裂強度，撕破強度和頂破強度增加。

effects of beating and pressing on the tearing strength of paper also have been investigated.───本文主要研究論述硫化體系對硫化硅橡膠老化后撕裂強度的影響。

Used for testing tearing strength of woven fabric, light-weight nonwoven fabric and coated fabric.───用于測定機織物，薄型非織造布及各種涂層織物的撕破強力。 U。

It has high tensile strength, peeling strength and tearing strength, it has long life compare to cold and heat lamination ones.───與冷和熱層壓箱相比，具有較高的抗拉強度，剝離強度，撕裂強度，壽命長的特點。

However, if the yarns are packed too tightly, the fabric will have reduced tearing strength, abrasion resistance and wrinkle recovery.───但是，如果紗線密度過大，織物的撕裂強度、耐磨強度及折皺恢復能力會降低。

The elongation at break, tensile strength and tearing strength of the HVSSBR cured with EV system are the best.───有效硫化體系的斷裂伸長率、拉伸強度、撕裂強度、耐磨性、抗熱氧老化性能最好。

Influence factors of PVC coating agent on tearing strength of coated fabric by changing coating agent composition is studied in this paper.───通過對涂層劑組成的調整，研究影響聚氯乙烯涂層織物撕裂強度的因素。

but tearing strength and pH is less important.───而撕裂度、酸堿性等因素影響較小。

however, the tearing strength of the hand-sheets decreased first with the increasing dosage of SDS and then increased;───撕裂度先隨非離子瓜爾膠用量的升高而下降其后隨之提高；

英語使用場景

The stability of chitosan and the breaking length, tearing strength, folding endurance and bursting strength of paper added the potentiator were measured.

Breaking elongation, tearing strength, and bursting strength of fabric firstly increased and then decreased with the decrease of honeycomb size.

The effect ampherlytic starch on tearing strength of newsprint from analysis of electric charge was studied.

Paper birch is the best of the hardwood, often running in bursting strength up to 80% and in tearing strength up to 90% of spruce pulp.

When webs weight increases, rupture strength, tearing strength and bursting strength are increased.