rejection ratio的意思

rejection ratio中文翻譯：

廢品率；衰減率；舍棄率

相似詞語短語

rejection───n.拋棄；拒絕；被拋棄的東西；蓋帽

rejection number───[工經]拒絕數；退件數；拒絕數，舍棄數

rejection rate───廢品率，報廢率，舍棄率；[工經]廢品率；報廢率

rejection letter───拒絕信

ratio───n.比率，比例

variation ratio───異眾比率；變異比率；變速比，變速范圍

rejection region───拒絕域；[數]否定區域；否定區域，拒斥域

click ratio───點擊率

gyromagnetic ratio───[電磁]旋磁比；[物]回磁比

雙語使用場景

This circuit features low temperature coefficient and high power supply rejection ratio.───該電路有較低的溫度系數和較高的電源抑制比。

By adding some auxiliary circuits, the power rejection ratio of the circuit is improved.───通過增加一些輔助電路，提高了電路的電源抑制比。

In this situation, the CMRR (common-mode rejection ratio) of the input differential amplifier was unsatisfactory.───在這種情況下，輸入差分放大器的CMRR 不令人滿意。

Common Mode Rejection Ratio: The ratio of the input voltage range to the peak-to-peak change in input offset voltage over this range.───共模抑制比，輸入電壓范圍除以該范圍內輸入失調電壓峰峰值。

In addition, we test the rejection ratio of very sample and get the result of the rubber sponge ball no damnification to the membrane.───并且通過測定各個樣品對卵清蛋白的截留率表明海綿橡膠球清洗并沒有造成管式膜的破損。

Results from HSPICE simulation show that the circuit has a high power supply rejection ratio (PSRR) and low temperature coefficient.───HSPICE模擬和測試結果表明，所設計的電路具有較高的電源抑制比和良好的溫度特性。

Methods The EEG with instrumentation amplifier of high CMRR (Common Mode Rejection Ratio) and some filters are collected.───方法：采用高共模抑制比的前置放大器以及多種濾波手段，保證較理想的獲取腦電信號。

A novel current reference source based on subthreshold MOSFET's with high power supply rejection ratio(PSRR) is presented.───基于亞閾值MOSFET，提出了一種新穎的高電源抑制比（PSRR）電流基準源。

The membrane thickness and rejection ratio increased whereas porosity and water flux decreased with polymer concentration increased;───隨固含量增加，膜厚度增加，孔隙率降低，水通量減小，截留率升高；

英語使用場景

In this situation, the CMRR ( common-mode rejection ratio ) of the input differential amplifier was unsatisfactory.

Its common mode rejection ratio ( CMRR ) was 65 dB at 100 kHz.

A novel current reference source based on subthreshold MOSFET's with high power supply rejection ratio(PSRR) is presented.

The advantages of using a spectrum analyser to measure image rejection ratio of a tuner are direct in observation, accurate in reading, easy in operation and so on.

Normal mode rejection ratio (NMRR) defines how well the instrument rejects or attenuates noise that appears between the HI and LO input terminals.

Normal Mode Rejection Ratio. The ability of an instrument to reject an AC interference (usually of line frequency) across its input terminals. Usually expressed in decibels at a frequency.

Thermal stability and Power Supply Rejection Ratio of the voltage reference circuit are the two major factors that influence the precision and stability of the whole system.

The circuit has advantages with ingeniously conception, well structure, integrated easily, more open-loop gain, more common-mode rejection ratio and alternating current characteristic.

This circuit features low temperature coefficient and high power supply rejection ratio.