pressure spring的意思

pressure spring中文翻譯：

壓簧，[機]壓力彈簧

相似詞語短語

pressure───vt.迫使；密封；使……增壓；n.壓力；壓迫，[物]壓強

spring───vi.生長；涌出，涌現；躍出；（尤指木料）翹曲、裂開；<喻>辯護；發源于；驚現；<非正式>付賬（尤指請客）；；vt.使跳起；使爆炸；使彈開；突然向某人提供（或提出）；<古>花錢；<非正式>突然發現、撞見（不正當活動或違法者）；突然運轉；使（犯人）獲釋（或逃跑）；解救；驚起（獵鳥），使（獵鳥）從躲藏處飛出；（船的桅桿或其他部分）翹曲，裂開；n.（Spring）（美、瑞、英、加、德）斯普林（人名）；n.春天；彈簧；泉水；活力；跳躍；adj.春天的

hydraulic pressure───液壓；水壓；n.水壓; 液壓

pressure from───來自于……的壓力

ambient pressure───環境壓力，周圍壓力；[流]環境壓力；周圍壓力

peer pressure───同伴壓力；來自同輩的壓力；同輩壓力; 同儕壓力; 同齡人壓力

external pressure───外部壓力，外壓，外壓力

hydrostatic pressure───流體靜壓（力）；[流]液體靜壓力

downward pressure───向下壓力；下向壓力

雙語使用場景

Pressure spring machine is composed of main machine, control system, motor power unit, auxiliary device and auxiliary equipment.───壓簧機械由主機，控制系統，電機動力單元，輔助裝置，附屬設備組成。

When the seal handle is pressed down, the pressure spring will be compressed, and the driving counting ring will be driven to rotate by the driving board.───壓下印把時，壓力彈簧被壓縮，驅動板通過主動記數環上的驅動滑槽推動主動記數環轉動。

seal handle is released, the pressure spring will reset and the driving counting ring driven by the driving board will rotate further.───松開印把時，壓力彈簧復位，驅動板再次通過驅動滑槽推動主動記數環繼續轉動。

Three types of clutch are the coil-pressure-spring type, diaphragm-spring type, and semi centrifugal type.───離合器的三種類型為：螺旋彈簧式，膜片彈簧式和半離心式。

A concave groove is arranged outside the conical shell, the large-end end surface of the shell is provided with a pressure spring end cover.───圓錐形殼體外面設有一凹槽，殼體的大頭端面設置有壓簧端蓋。

Check and found that the left and right feed roller pressure spring laying, the replacement of spring.───再查，發掘把握送紙滾輪壓簧一長一短，調換彈簧。

and a pressure spring is sheathed outside the liquid-storage chamber.───壓簧套裝在儲液腔室的外面。

the rectangular plates in each pair are connected with each other by a pressure spring.───每對矩形板之間通過壓力彈簧相聯接。

Host : hypertension suspended roller mill process, Roller hanger on securing a high- pressure spring 1000-1500 kg .───工作過程：高壓懸輥磨主機內，磨輥吊架上緊固有1000-1500公斤壓力的高壓彈簧。

英語使用場景

When the seal handle is pressed down, the pressure spring will be compressed, and the driving counting ring will be driven to rotate by the driving board.

The cutting straw is pressed to the baffle by the star wheel again. Under the action of the feeding gear and the pressure spring, the erect straws make the motion of transverse feeding.

After the seal handle is released, the pressure spring will reset and the driving counting ring driven by the driving board will rotate further.

The water heating control valve is composed of a valve casing, a valve outer cover, an inner cover, a pressure spring, a valve core, a positioning device and a sealing ring.

A pressure regulation screw bolt can be arranged on the pressure spring, and the pedals can also be installed on the lateral part of the casing.