secondary winding的意思

secondary winding中文翻譯：

[電]二次繞組；復卷繞組

相似詞語短語

winding───adj.蜿蜒曲折的；v.蜿蜒而行；纏繞；卷繞；被彎曲；環繞（核心）；給（鐘表等）上發條；轉動（鑰匙、把手）；（使）（錄像帶、錄音帶等）倒退（或前進）；（用絞車等）吊起（某物）；（使）氣急；輕拍后背使（嬰兒）打嗝；嗅出（人或動物的）氣味；（詩、文）吹（號角）（wind的現在分詞）；n.卷繞；線圈；蜿蜒曲折的路徑；n.(Winding)（美）溫丁（人名）

secondary───n.副手；代理人；adj.第二的；中等的；次要的；中級的

winding river───（美）風河系統公司；溫德河（美國懷俄明州河流）

secondary consumer───次級消費者

secondary education───中等教育

secondary color───次生色；n.合成色，間色；二次色

armature winding───[電]電樞繞組

winding stairs───螺旋式樓梯

secondary school───n.中學；中等學校

雙語使用場景

using, the secondary winding can not be short-circuited or operating over-load.───使用時二次繞組不能短路及超負荷運行。

composed of a primary winding, secondary winding and core of soft iron.───線圈有初級線圈、次級線圈和鐵芯組成。

output transformer sums these oppositely-phased currents to produce the output waveform in the secondary winding.───輸出變壓器匯總這些生地階段產生的電流輸出波形中的二次繞組。

Since the secondary winding is normally operated into a high-impedance circuit, the secondary current is quite small.───因為次級繞組通常輸入高阻抗的電路，因此次級電流很小。

fully enclosed and busbar type. The iron core is circular and the secondary winding goes around the core before casting by epoxy.───本型電流互感器的鐵心為圓環形，二次繞組勻繞制在鐵心圓周上，用環氧樹脂混合料澆注成形。

Copper losses are the resistive heating losses in the primary and secondary winding of the transformer.───銅的電阻加熱損失的損失在小學和中學繞組變壓器。

Short circuit secondary winding who will not take part into transformation ratio test to avoid open circuit generating HV.───變比試驗時應將非被測二次繞組短接，以防開路產生高壓。

Two sub-windings of secondary winding, capacitor and centrifugal switch are serially connected and then to external power supply.───副繞組的兩繞組串聯后和電容、離心開關串聯與外接電源相連接。

It just needs one single-secondary-winding CT and one transformer auxiliary winding, which makes the whole driving scheme very simple.───其只需一個單繞組電流互感器和一個變壓器輔助繞組，極大的降低了驅動電路的復雜程度。

英語使用場景

Situated within the coil's primary winding is the secondary winding.

The testing voltage of the secondary winding of transformer has to be 80% stipulated testing voltage while repeated power frequency voltage with-stand test needed.

It is composed of a primary winding, secondary winding and core of soft iron.

There should be no short circuit at the secondary winding for a voltage transformer, or the voltage transformer would be damaged.

The paper analyses the current transformer(CT) that secondary winding possesses casing tap, and its secondary connector wiring fault's influence on the CT changing rate.

In using, the secondary winding can not be short - circuited or operating over - load.

The secondary winding offering the 110,220V voltage is used for power supply to operation machine.

Ignition coil secondary winding. Has a high voltage (40,000 V or more) induced in it each time the primary magnetic field collapses.

The excitation characteristic of secondary winding of current transformer is the key factor to transformer performance and the quality of secondary winding directly influences that of the quality.