L/D的意思

    「L/D」經常作為「Length to Diameter Ratio」的縮寫來使用，中文意思：「長徑比」。

L/D（長徑比）詳細解釋

• 英文縮寫詞：L/D
• 英文單詞：Length to Diameter Ratio
• 中文簡要解釋：長徑比
• 分類：Miscellaneous
• 領域：Unit Measures

以上為Length to Diameter Ratio英文縮略詞L/D的中文解釋，以及該英文縮寫在英語的流行度、分類和應用領域方面的信息。

英文縮寫L/D的擴展資料

1. Screw of big length to diameter ratio, uniform plasticationhigh plasticizing capability.大長徑比(L/D)螺桿、塑化均勻、塑化能力特高。
2. When the length to diameter ratio is bigger than 100, then the difficulty of processing is higher.當長徑比(L/D)大于100時，則加工難度更高。
3. The experimental research verified that this method had probed a new way for solving the sealing problem of stirring shaft of high-speed pressured reaction axe with large length to diameter ratio.實驗研究證明，該方法為解決高速大長徑比(L/D)壓力反應釜攪拌軸密封問題探索了一種新途徑。
4. The effects of whiskers length to diameter ratio that material ratio, reaction time, reaction temperature and the concentration on magnesium sulfate solution were investigated in experiment.實驗過程中考察了物料配比、反應時間、反應溫度及硫酸鎂溶液的濃度對晶須長徑比(L/D)的影響。
5. With the minimum frictional power loss and the maximum " the minimum oil film thickness " as the optimum objectives, the marine stern tube bearing is optimized by adjusting the length to diameter ratio, the clearance ratio and the altitude angle ratio.并分別以功耗最小、最小油膜厚度最大為優化目標，通過改變長徑比(L/D)、間隙比、偏角比對尾管軸承進行了優化設計。

「Length to Diameter Ratio」的縮寫「L/D」意思是「長徑比」。