Z的意思
「Z」經常作為「Depth axis」的縮寫來使用,中文意思:「深度軸」。
Z(深度軸)詳細解釋
- 英文縮寫詞:Z
- 英文單詞:Depth axis
- 中文簡要解釋:深度軸
- 分類:Academic & Science
- 領域:Physics
英文縮寫Z的擴展資料
- The third axis, the depth axis, marks the development path of individual countries.三是從一國自身發展的垂直軸看。
- In this paper, the optical exposure model built on the depth axis can solve the problem of the jumping refractive index in the propagating path in proximity lithography, and the scalar diffraction theory was generalized to apply in micro-heterogeneous medium.本文在深度軸(Z)上建立的光學模型解決了接近式光刻中光束傳播路線上折射率跳變問題,且對標量衍射理論在微不均勻介質的應用上進行擴展。
- V-shaped notch blasting is that cutting slots with certain depth along axis - direction of the hole is determined according to the blast-crazing, and then load uncoupled charge and detonation.V形刻槽爆破是指在炮孔孔壁上按爆破開裂方向,切出一定深度的軸向對稱V形槽,采用不耦合裝藥結構進行的一種斷裂控制爆破。
- The simulation experiments for typical 3-D profile? inclined plane show that the measuring errors of the system in axis Z ( depth direction ), axis X and axis Y are 0.31 %, 0.22 % and 0.23 %, respectively, which meet with the prospected demands.對典型的平面類三維面形&斜面進行了仿真實驗,得到系統在Z軸(深度方向)、X軸、Y軸方向的測量誤差分別為0.31%,0.22%,0.23%,達到了系統的預期要求。
- According to the concept of the ratio of equivalent plastic length to the depth of neutral axis in failure section given in reference, it is revealed that the ultimate stress in unbonded tendons is related to the ratio.引用有關文獻提出的等效塑性區長度與破壞截面中性軸高度的比值的概念,并認為無粘結預應力筋極限應力與此比值有關。